Promise Technology Vess A Series Product Manual page 65

Vess A6120 Product Manual
3. From the Application Type menu, choose an application that best describes your intended use for this
disk array:
• File Server
• Video Stream
• Transaction Data
• Transaction Log
• Other
Click the Update button.
4.
Or check the Automatic Update box and updates will occur automatically.
The following parameters display:
• Disk Arrays – The number of physical drives in the disk array, their slot numbers, configurable capacity,
and the number of logical drives to be created
• Logical Drives – The slot number of the logical drive(s), their RAID level, capacity, and stripe size
• Spare Drives – The physical drive slot number of the dedicated hot spare assigned to this disk array (all
RAID levels except RAID 0)
If you accept these parameters, proceed to the next step.
If you do NOT accept these parameters, review and modify your selections in the previous steps.
5. When you are done, click the Submit button.
The new disk array appears in the Disk Array List on the Information tab.
53
Managing with WebPAM PROe