Promise Technology Vess A Series Product Manual page 21

Vess A6120 Product Manual
UID Button
Press the UID button to toggle the front panel UID LED and the baseboard UID LED on and off. You are able
to locate the server you're working on from behind a rack of servers.
Power Button
Press the power switch button to toggle the system power on and standby/sleep modes.
To remove all power from the system completely, disconnect the power cord from the server.
Power LED
Status Description
Green Power on
Off Power off
UID LED
Status Description
Blue System identification is active.
Off System identification is disabled.
9
Introduction