Promise Technology Vess A Series Product Manual page 213

Vess A6120 Product Manual
snmp SNMP
-t <startup type>
automatic
manual Component has to be manually started by issuing command.
-s "<option>=<value>" Used to specify settings for this component. This is used when
email settings
serverip= SMTP server IP address.
serverport=
authentication= SMTP server authentication.
no
yes
username=
password=
senderaddr=
subject= Email subject.
webserver settings
httpport=
sessiontimeout= Session time out in minutes. Maximum 1440.
ssl= Turn on or off SSL for web server.
enable
disable
httpsport=
snmp settings
port= Port number.
sysname=
syslocation=
syscontact=
Specifies the startup type.
Component is automatically started when system boots.
modifying (mod). These options are comma separated.
SMTP server port number.
Username if using SMTP authentication.
Password if using SMTP authentication.
Sender's email address.
Port number for web server.
Port number if using SSL.
System name string.
System location string.
System contact information string.
201
Managing with CLI