Promise Technology Vess A Series Product Manual page 175

Vess A6120 Product Manual
-p <PD ID list> Specifies physical drives to be used in an array, with -a add option. PD IDs are
specified individually or separated by comma. Sequential group of physical drives are specified by
placing a ~ between numbers such as 1~6. This will include physical drives 1, 2, 3, 4, 5, and 6.
-s "<option>=<value> Specifies array settings when creating (add) or modifying (mod) an
array. Options are comma separated.
alias= A user-specified array name. Up to 32 characters, alpha-numeric characters, blank spaces
and underscores. Beginning and ending blank spaces are discarded.
mediapatrol= Enables or disables Media Patrol for this array.
enable
disable
pdm= Enables or disables PDM for this array.
enable
disable
-l "<option>=<value>" Specifies logical drive settings when adding a logical drive to an
existing array (addld) or during array creation (add). Options are comma separated.
<LD ID list> Specifies a list of Logical Drive IDs. Requires the -a delld option.
ID= Assigns a specific ID to an array. Overrides automatic ID assignment. Valid
values are 0-255.
Alias= A user-specified name for the logical drive. Raid=
0 Striping.
1 Mirroring on two drives.
5 Parity, requiring 3 or more drives.
10 Mirroring on even number of drives.
1e Extended mirroring, requiring 2 or more drives.
50 Striping on multiple RAID 5, requiring 6 or more drives.
6 Allow two drive failure, requiring 4 or more drives.
60 Striping on multiple RAID 6, requiring 8 or more drives.
The default is enable.
The default is enable.
163
Managing with CLI
Specifies logical drive RAID level.