Henny Penny LVE-203 Technical Manual page 11

Problem Cause
Cold zone (bot-
tom of vat) full of
crumbs.
Improper rinsing
after cleaning the
vat.
Oil will not Drain valve
drain from clogged with
vat. crumbs.
Faulty actuator.
Drain trough
clogged.
Oil leaking Obstruction in
through drain.
drain valve.
Faulty drain
valve.
Locations with
RTI, the 3-way
valve is stuck
open.
Vat is JIB is low or
under- empty.
filled.
JIB oil line is
clogged or
collapsed.
Filter pan needs
cleaned.
Quick disconnect
not engaged
properly.
Bubbles in Filter pan not
oil during completely
entire filter- engaged.
ing
Filter pan
process.
clogged.
Damaged O-ring
on filter line re-
ceiver on fryer.
Filter motor Filter line connec-
runs but tions loose.
Correction
Filter oil.
Rinse the vat thoroughly to remove any cleaning agent in
the vat.
Open valve, use straight white brush to force crumbs
through drain valve.
Replace actuator per 7.14 Drain Valves , page
Remove and clean out drain trough.
Remove obstruction.
Replace drain valve.
The RTI system can be disconnected until RTI repairs the
valve.
Fill the JIB.
Check JIB line.
Clean filter pan and change paper or pad.
Disconnect and reconnect quick disconnect fitting.
Make sure filter pan return line is pushed completely into
the receiver on the fryer.
Clean pan and change pad.
Change O-ring.
Tighten all filter line connections.
62.
3