Protection - ZyXEL Communications XS1930-12F User Manual

Table 13 Wizard > Basic > Step 4 Summary (continued)
LABEL
Type
Member
Previous
Finish
Cancel

4.4.2 Protection

In Protection, you can set up loop guard and broadcast storm control.
In order to set up loop guard, please do the following. Click Wizard > Protection > Step 1 Loop Guard to
access this screen.
Figure 39 Wizard > Protection > Step 1 Loop Guard
Each field is described in the following table.
Table 14 Wizard > Protection > Step 1 Loop Guard
LABEL
Loop Guard
Select all ports
Next
Cancel
Chapter 4 Web Configurator
DESCRIPTION
This field displays Static or LACP of this group.
This field displays the members of this group.
Click Previous to show the previous screen.
Review the information and click Finish to create the task.
Click Cancel to exit this screen without saving.
DESCRIPTION
Select all ports to enable the loop guard feature on all ports.
You can select a port by clicking it.
Click Next to show the next screen.
Click Cancel to exit this screen without saving.
XS1930 Series User's Guide
57