ZyXEL Communications XS1930-12F User Manual page 320

Table 168 SNMP System Traps (continued)
OPTION OBJECT LABEL
poe pethPsePortOnOffNotification
(For PoE models
pethMainPowerUsageOnNo
only)
tification
pethMainPowerUsageOffNo
tification
Table 169 SNMP Interface Traps
OPTION OBJECT LABEL
linkup linkUp
linkdown linkDown
lldp lldpRemTablesChange
Table 171 SNMP IP Traps
OPTION OBJECT LABEL
ping pingProbeFailed
pingTestFailed
pingTestCompleted
traceroute traceRouteTestFailed
traceRouteTestCompleted
Table 172 SNMP Switch Traps
OPTION OBJECT LABEL
rmon RmonRisingAlarm
RmonFallingAlarm
Chapter 38 Access Control
OBJECT ID
1.3.6.1.2.1.105.0.1
1.3.6.1.2.1.105.0.2
1.3.6.1.2.1.105.0.3
OBJECT ID
1.3.6.1.6.3.1.1.5.4
1.3.6.1.6.3.1.1.5.3
1.0.8802.1.1.2.0.0.1
OBJECT ID
1.3.6.1.2.1.80.0.1
1.3.6.1.2.1.80.0.2
1.3.6.1.2.1.80.0.3
1.3.6.1.2.1.81.0.2
1.3.6.1.2.1.81.0.3
OBJECT ID
1.3.6.1.2.1.16.0.1
1.3.6.1.2.1.16.0.2
XS1930 Series User's Guide
320
DESCRIPTION
This trap is sent when the PoE port delivers
power or delivers no power to a PD.
This trap is sent when the usage power is
above the usage indication threshold.
This trap is sent when the usage power is
below the usage indication threshold.
DESCRIPTION
This trap is sent when the Ethernet link is up.
This trap is sent when the Ethernet link is
down.
The trap is sent when entries in the remote
database have any updates.
Link Layer Discovery Protocol (LLDP), defined
as IEEE 802.1ab, enables LAN devices that
support LLDP to exchange their configured
settings. This helps eliminate configuration
mismatch issues.
DESCRIPTION
This trap is sent when a single ping probe
fails.
This trap is sent when a ping test (consisting
of a series of ping probes) fails.
This trap is sent when a ping test is
completed.
This trap is sent when a traceroute test fails.
This trap is sent when a traceroute test is
completed.
DESCRIPTION
This trap is sent when a variable goes over
the RMON "rising" threshold.
This trap is sent when the variable falls below
the RMON "falling" threshold.