ZyXEL Communications XS1930-12F User Manual page 71

Figure 49 Initial Setup Example: Management IP Address
Connect your computer to any Ethernet port on the Switch. Make sure your computer is in the same
1
subnet as the Switch.
Open your web browser and enter 192.168.1.1 (the default IP address) in the address bar to access the
2
Web Configurator. See
Click Basic Setting > IP Setup > IP Configuration in the navigation panel.
3
Configure the related fields in the IP Configuration screen.
4
For the VLAN2 network, enter 192.168.2.1 as the IP address and 255.255.255.0 as the subnet mask.
5
Chapter 5 Initial Setup Example
Section 4.2 on page 44 for more information.
XS1930 Series User's Guide
71