TVLogic LVM-070C Operation Manual page 22

6. Button Functions
[3] SCAN Button
• This product supports various scan modes. •
• • Press [SCAN] button on the front of the
monitor to activate diff erent scan modes.
1. [Press [SCAN] button continuously to
activate various scan modes: ZERO SCAN ->
OVER SCAN -> Pixel To Pixel -> USER.
2. The following represents the diff erent types
of scan mode. When a scan mode is selected,
display skips the next mode if its required
condition is not met.
- OVER SCAN : Zooms in/out of the image to
96% of its original size without changing the
aspect ratio of.
- ZERO SCAN : Zooms in/out of the image
without changing the aspect ratio.
- 1:1 SCAN : 1:1 pixel mapping of original
image. This feature is available only when
the size of the original image is bigger
than the screen size. Press [ENTER] button
to rotate the position : CENTER -> LEFT TOP
-> RIGHT TOP -> RIGHT BOTTOM -> LEFT
BOTTOM -> CENTER -> ....
22 Multi Format LCD Monitor
UP
DOWN
<CENTER> <LEFT TOP>
UP
DOWN
<RIGHT BOTTOM>
<Position change in Pixel To Pixel>
UP
DOWN
<RIGHT TOP>
UP
DOWN
<LEFT BOTTOM>