Install The Outlet Fitting Assembly - Cardinal Health AirLife nCPAP Hardware Service Manual

13.4

Install the Outlet Fitting Assembly

1. Slide the Outlet Fitting Assembly into the Bottom Case at a downward angle.
This assembly contains electronic components that are ESD sensitive.
ESD control and handling measures should be followed while performing
2. Insert the mounting screw into the center of the assembly and turn until the screw
head just comes in contact with the Outlet Fitting Assembly, reverse half a turn, and
then tighten to a torque of 5 in-lbs using a T-10 Torx driver.
© © © © 2008, Cardinal Health
CAUTION
this process.
Slide the Outlet Fitting Assembly into the
Bottom Case at a downward angle.
Page 53 of 81
®
AirLife nCPAP Driver Service Manual