Cardinal Health AirLife nCPAP Hardware Service Manual page 56

7. Screw the white Luer lock ring to the Oxygen Sensor Filters connected to the
Divider/Oxygen Sensor Assembly.
8. Ensure that all joints between the two (2) Oxygen Sensor Filters and the Oxygen
Sensor Elbow have remained tight.
© © © © 2008, Cardinal Health
Bulkhead to Valves Connector (6)
Connect luer lock to Oxygen
Sensor Filters (7)
Install 2 mounting screws
Torque to 7 in-lbs (5)
Page 56 of 81
®
AirLife nCPAP Driver Service Manual
CN16 to CN22, (3)
CN15 to CN21, (2)
Press on silicone
tube (1)