Appendix A
Configuring a Mac computer to use DHCP
HN9500 Satellite Router User Guide
62
1037737-0001 Revision E
This section explains how to configure your computer to use DHCP if you are using an Apple
Mac computer.
1. From the Mac interface, select System Preferences.
The System Preferences menu appears.
2. Under Internet & Network, click the Network icon.
The Network screen appears as shown in
Figure 45: Mac Network screen
3. Ensure that the TCP/IP tab is selected.
4. Select Using DHCP from the Configure drop-down list as shown in
from the configure drop-down menu
The IP Address field becomes disabled.
Figure 46: Select DHCP from the configure drop-down menu
5. Click Apply Now to close the screen.
Figure 45: Mac Network screen
on page 62.
Computer settings
on page 62.
Figure 46: Select DHCP