Text Links; Figure 8: System Control Center Home Page - Hughes HN9500 User Manual

Satellite router

Hide thumbs Also See for HN9500:

Table of Contents

System Control Center

Text links

Note: The following apply to the screen illustrations in this user guide:

• The screen illustrations are examples. Values shown in these illustrations may not

apply to your satellite router. Do not use values shown to configure your router unless

you are specifically instructed to do so.

• Most screens shown in this guide are viewed with a browser such as Internet Explorer.

However, in this guide, usually the browser is not shown (for example, toolbars and

outside edges are not shown). Also, most screen illustrations show only the relevant

part of the screen.

• On some screens and in some messages you may see the word terminal or the

abbreviation ST. Both refer to the satellite router.

The System Control Center home page includes the following text links:

System Status links

• View System Status – Opens the System Status page, which displays general system status

information such as signal strength and administrative status.

• View Reception Information – Opens the Reception Information page, which displays

information on data received by the satellite router.

• View Transmission Information – Opens the Transmission Information page, which

displays information on data transmitted by the satellite router.

HN9500 Satellite Router User Guide

1037737-0001 Revision E

Chapter 2

Table of Contents