Setting Up 64-Xx / Ap 5.4 / Ap 7.T; Activating The Rewinder; Selecting The Direction Of Rotation - Novexx Solutions 64 Series User Manual

01/13 Rev. 5.05-01

Setting up 64-xx / AP 5.4 / AP 7.t

1.
2.
3.
4.
 A complete description of the parameters can be found in the chapter "Info


1. Press the Prog button
2. Press the Cut button
3. Press the Online
4. Repeatedly press the
5a. Press the Online
5b. Press the Cut button
6. Press the Online
7. Repeatedly press the
USER MANUAL
Rewinder 2000
Setup the printer for rewinder-use by performing the following steps:

Activating the rewinder

Selecting the direction of rotation

Setting the sensor current
Adjusting the sensor on page 13.
How to perform the steps is explained in the following.
Printouts and Parameters" in the User Manual 64-xx.
Activating the rewinder
CAUTION! - Selecting a non-existent option can cause the device to
malfunction!
SYSTEM PARAMETERS > Periph. device
Set
The rewinder is now activated. Other previously activated options are
automatically deactivated.
Selecting the direction of rotation
Action
button
Cut button until
button
button
Prog button until
on page 11.
on page 11.
on page 12.
to "Rewinder".
Display
PRINT INFO
PRINT PARAMETERS
Print speed
Rewind direction
Rewind direction
Printing inside
Rewind direction
Printing outside
Rewind direction
OFFLINE 0 JOBS
Attachment, Setup
Note
Step 5a for printing
facing inwards
Step 5b for printing
facing outwards
11