Searching A Preprogrammed Frequency Range; Search Band Charts - GRE PSR-295 Owner's Manual

Searching a Preprogrammed Frequency
Range
The scanner contains these preprogrammed search
ranges, stored in the search bank.
Bank Band
Marine Marine Channels
CB CB (Citizens Band) Channels
PMR PMR (Personal Mobile Radio) Channels
Air Air Band
All All Receivable Frequencies
Limit Limit Search (User changeable)
Follow these steps to select preprogrammed search
bands and search them for active frequencies:
1. Repeatedly press SEARCH to select your desired
search banks (Marine, CB, PMR, Air, All, Limit)
2. In the Marine, CB and PMR bands, you can directly
select a channel or search through the band. When M
appears at the left most position of the second line,
you can directly select a channel (refer to "Search Band
Charts"). Press the desired channel number while M
appears to select it. You can also change the chan-
nels by pressing /\ or \/.
3. Press FUNC then SEARCH while M appears. M
changes to S and now you can search through the
band. Press FUNC then SEARCH again to return to
the previous mode.
4. Rotate SQUELCH clockwise and leave it set to a point
just after the hissing sound stops. After 2 seconds (if
the delay feature is on), the received frequency ap-
pears and the scanner starts searching.
5. When the scanner finds an active frequency, it stops
searching.

Search Band Charts

Search Range: Marine (Marine Band)
Receive mode: FM
20
Page 20 2004/07/06, 15:37