Printing A Configuration Report - SATO Argox I4 Series User Manual

3 Printer Operation

3.3 Printing a Configuration Report

To perform a self-test and print a configuration report, helping to check printer's
print quality and internal settings. Steps as below:
1. Turn off the printer.
2. Load media and ribbon.
3. Press and hold the FEED button while turning on the power.
4. When "SELF-TEST ..." is displayed on the LCD, release the FEED button.
5. The printer now prints out a configuration report. (as the sample in next page)
All characters will be printed in 2 columns: the right shows characters
received from your system, and the left are the corresponding hexadecimal
values of the characters. It allows users or engineers to verify and debug the
program.
For printer without LCD, please see indicators.
Sample of Configuration Report
Printing Media Calibration & Configuration
41