2 Get started
Load Media In Guillotine Cutter Mode
Steps 1 to 3 are the similar with "Standard Mode".
1.
Lift the top cover to expose the media compartment.
2.
Insert the media roll into the media supply spindle and move the media guide to
the inside.
3.
Turn the head latch counter-clockwise and open the bracket. Turn on the
outside media guide.
4.
Insert the media into the print head module and under the paper sensor guide.
Push down mechanism release lever from Guillotine Cutter and lead media
through Guillotine Cutter.
Print Head Module
Release Lever
24
Load media
Paper Sensor Guide