SATO Argox I4 Series User Manual page 48

3 Printer Operation Printing Media Calibration & Configuration
1. Version Information
The firmware version and its build date.
2. Standard RAM
Total SDRAM size.
3. Available RAM
RAM is able to be used.
4. Flash Type
The flash memory type and size.
5. Available Flash
Flash is able to be used.
6. No of DL soft fonts (FLASH)
The number of fonts is downloaded in Flash.
7. No of DL soft fonts (RAM)
The number of fonts is downloaded in RAM.
8. No of DL soft fonts (HOST)
The number of fonts is downloaded in USB HOST.
9. H. Position Adjust
Move the print position horizontally.
10. Sensor Type
The media sensor type such as reflective sensor.
11. Label-less Calibration Value
Check if a label-less calibration has been performed on the printer. If not,
the value is 0000.
12. RTC Time
The date and time of the real-time clock (RTC). The default format is
month/day/year (hour:minute:second). If your printer has a built-in RTC, the
RTC time shows here.
13. Max Label Height
The max label length you can print at a time. For 200 dpi models, it is 100
inches; for 300 dpi models, it is 50 inches.
14. Print Width
The print width in dots.
15. Lab Len (Top to Top)
43