2 Get started
Load Media In Peel Off Mode
Steps 1 to 3 are the similar with "Standard Mode".
1. Lift the top cover and front access door to expose the media compartment.
2. Insert the media roll into the media supply spindle and move the media guide to
the inside.
Turn the head latch counter-clockwise and open the bracket. Turn the outside
3.
media guide counter-clockwise for media insert.
4. From the leading end of the media roll remove enough labels to expose 6-inches
of backing paper.
5. Lead the media backing paper through the print head module.
Print Head
Module
Media
18
Load media