Using The Reset Button; Resetting The Router To Factory Defaults - Arris Touchstone DG1660 User Manual

Getting
Safety Started
A
Reset
USB
1
2
3
4
Ethernet
10/100/1000
Cable
Ethernet
Installation Configuration

Using the Reset Button

Use the Reset button (A), on the back of the Data Gateway, to reset the modem
and perform initialization as if you power cycled the unit. You may need to reset the
Data Gateway if you are having problems connecting to the Internet. Using this
button will be rare.
Use a pointed non-metallic object to press this button. The Reset button is re-
cessed to prevent accidental resets.
The diagram on the left shows the location of the reset button.

Resetting the Router to Factory Defaults

To reset the router to factory defaults, press and hold the Reset but ton (A)on the
back of the Data Gateway for more than fifteen seconds. This restores the wireless
setup configuration and router configuration parameters to the factory defaults. You
may need to do this if a misconfiguration has locked out all access.
Touchstone DG1660 Data Gateway User's Guide
Usage Troubleshooting Glossary
41