Resetting The Router To Factory Defaults; Booting From Battery - Arris Touchstone TG1682G User Manual

Use a pointed non-metallic object to press this button. The Reset button is recessed to
prevent accidental resets.
1. Reset button
2. USB
3. Tel 1
4. Tel 2

Resetting the Router to Factory Defaults

To reset the router to factory defaults, press and hold the Reset button on the back of the
Telephony Gateway for more than fifteen seconds. This restores the wireless setup
configuration and router configuration parameters to the factory defaults. You may need to
do this if a misconfiguration has locked out all access.

Booting from Battery

The TG1682G supports a "Boot from Battery" feature that allows the Telephony Gateway to
provide continued telephone service during power outages.
Release 24 STANDARD 1.2 August 2016
© 2014-2016 ARRIS Enterprises LLC. All Rights Reserved.
Chapter 7: Using the Telephony Gateway
5. Ethernet (1 - 4)
6. Cable
7. MoCA
8. Power
Touchstone TG1682G Telephony Gateway User Guide
36