Command Summary - ATEN KM0932 User Manual

KM0032 / KM0532 / KM0932 User Manual

Command Summary

A description of the commands supported with this function is provided in the
table below:
Command
AS
ST
SP
TK
TS
LP
LI
SN
LU
Exit
166
This is the Auto Scan Mode command. It is followed by a string
that specifies the console, duration, and ports you want to auto
scan (see AS, page 168 for details).*
This is the Disable Auto Scan command. It is followed by a
string that specifies the console on which you want auto scan
disabled. (see ST, page 168 for details).*
This is the Switch Port command. It is followed by a string that
specifies which port you want to switch to (see SP, page 169 for
details).*
This is the Terminate KVM Session command. It is followed by
a string that specifies which port session to terminate (see TK,
page 170 for details).*
This is the Terminate Console Session command. It is followed
by a string that specifies which console session to terminate
(see TS, page 170 for details).
This is the List KVM Port Information command. It is followed
by a string of commands to specify which ports on the switch or
chain you want to list. (see LP, page 171 for details).*
This is the List KVM Ports command. It is followed by the
console port number of the console whose KVM ports you wish
to list (see LI, page 172 for details).*
Note: Following the command with the word ALL, instead of the
console port number, lists the KVM ports for all available
consoles.
This is the Change Port Name command. It is followed by a
string that specifies which port you want to change and the new
name for the port. (see SN, page 172 for details).*
This is the List User Profile command. It is followed by the
console port number of the console whose logged in users you
wish to see. It displays the profile of the user logged into the
specified Console Module, and what the user's status is
(Administrator, or User). (See LU, page 173 for details.)
Note: 1. Super Administrators' user names and status level are
not displayed. NA displays, instead.
2. Following the command with the word ALL, instead of
the console port number, lists the user profiles of all
users logged into all Console Modules.
Exits the terminal session.
Description