Table of Contents
Advertisement
KA7140 Properties
When a KA7140 Adapter Cable is used to connect a serial device to the
KM0032 / KM0532 / KM0932, in addition to the usual parameters, serial
parameters need to be configured, as well. To configure the KA7140 to interact
with the connected device, you need to set its serial parameters to match the
parameters of the device, as follows:
1. In the Port Access page Sidebar, select the port that the KA7140 is
connected to.
2. Select Properties on the menu bar.
3. In the main panel, select the KA7140, then click Modify (at the bottom of
the page).
The KA7140's Properties page comes up:
Console UI
Browser UI
Chapter 8. Port Access
127
Advertisement
Table of Contents
