Page 1 5/9 Console 32-Port Matrix KVM Switch KM0532 / KM0932 Matrix Expansion KVM Switch KM0032 User Manual www.aten.com...
Page 2: Fcc, Ce Information
KM0032 / KM0532 / KM0932 User Manual FCC, CE Information FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Page 3: User Information
KM0032 / KM0532 / KM0932 User Manual User Information Online Registration Be sure to register your product at our online support center: International http://eservice.aten.com Telephone Support For telephone support, call this number: International 886-2-8692-6959 China 86-10-5255-0110 Japan 81-3-5615-5811 Korea 82-2-467-6789...
Page 4: Package Contents
Manual Part No. PAPE-0308-AX3G F/W Version: 2.0.191 Manual Date: 2013-10-31 Altusen and the Altusen logo are registered trademarks of ATEN International Co., Ltd. All rights reserved. All other brand names and trademarks are the registered property of their respective owners.
Page 5: Table Of Contents
KM0032 Front View ........
Page 6 KM0032 / KM0532 / KM0932 User Manual Network Administration........28 Topology Considerations .
Page 7 KM0032 / KM0532 / KM0932 User Manual Creating IO Groups ........72 Creating Console Groups .
Page 8 KM0032 / KM0532 / KM0932 User Manual History........... 117 Preferences .
Page 9 KM0032 / KM0532 / KM0932 User Manual The Menu Bar ..........151 Configure .
Page 10 KM0032 Specifications ........195...
Page 11: About This Manual
KM0032 / KM0532 / KM0932 network environment, and change the default password. Chapter 4, Logging In, describes how to log in to the KM0032 / KM0532 / KM0932 from a local console and an internet browser.
Page 12 KM0032 / KM0532 / KM0932 User Manual Chapter 13, RS-232 Port Operation, explains how to access and operate the devices connected to the KM0032 / KM0532 / KM0932 via a serial terminal connection. An Appendix, provides technical and troubleshooting information.
Page 13: Conventions
KM0032 / KM0532 / KM0932 User Manual Conventions This manual uses the following conventions: Monospaced Indicates text that you should key in. Indicates keys you should press. For example, [Enter] means to press the Enter key. If keys need to be chorded, they appear together in the same bracket with a plus sign between them: [Ctrl+Alt].
Page 14 KM0032 / KM0532 / KM0932 User Manual This Page Intentionally Left Blank...
Page 15: Chapter 1. Introduction
KM0932 Dual * KM0032 switches operate as slaves chained to a KM0532 or KM0932. As such, they do not use a console of their own. Devices connected to them are accessed through a console belonging to the master KM0532 or KM0932.
Page 16: Features
KM0032 / KM0532 / KM0932 User Manual Server access and control is easily accomplished by means of a convenient, intuitive, graphical user interface. In addition, once initial network setup has been accomplished at the local console level, system administration can conveniently be managed remotely over the internet from any web browser.
Page 17 Remote authentication supports; RADIUS, LDAP, TACACS, LDAPS, and MS Active Director Supports ATEN Log Server and Syslog Server Saves valuable time - backup and restore settings when changing master stations – backup user and group accounts, station names, port access rights, and user profile settings.
Page 18 KM0032 / KM0532 / KM0932 User Manual A master station can allocate the best available path for the user. If the current path is busy and there is another path available the user is automatically redirected to the available path Users can access features on multiple computers simultaneously –...
Page 19: Requirements
Chapter 1. Introduction Requirements Consoles The following hardware components are required for each KVM console: A VGA, SVGA, or multisync monitor capable of displaying the highest resolution provided by any computer on the installation Keyboard and mouse (PS/2 or USB) Console modules are required to connect KVM consoles to the KM0532 / KM0932.
Page 20: Cables
KA7178 Virtual Media, and Smart Card Reader support *See KA7178 Dual Output Dongle, page 53, for details Connecting Cables Other cables that are used to connect up the KM0032 / KM0532 / KM0932 installation include the following: Function Type Connecting Console Modules or KVM Adapter...
Page 21: Operating Systems
Chapter 1. Introduction Operating Systems Supported operating systems are shown in the table, below: Version Windows 2000 and higher Linux RedHat 7.1 and higher Fedora Core 2 and higher SuSE 9.0 and higher Mandriva (Mandrake) 9.0 and higher UNIX 4.3 and higher FreeBSD 4.2 and higher Solaris 8 and higher...
Page 22: Components
KM0032 / KM0532 / KM0932 User Manual Components KM0532 / KM0932 Front View KM0532 KM0932 Component Description Power LED Lights (blue) to indicate that the unit is receiving power. KVM Port LEDs The KVM Port LEDs provide status information about their...
Page 23 Chapter 1. Introduction Component Description LAN LED The LED lights ORANGE to indicate 10 Mbps data transmission speed. The LED lights GREEN to indicate 100 Mbps data transmission speed. The LED flashes when data is being transmitted Reset Switch Pressing in this button performs a system reset. When the system is reset, the switch beeps, and then the KVM port LEDs flash in succession until the reset is completed.
Page 24: Km0032 Front View
Selected (has the KVM focus) and is Online. Station ID LED The KM0032's Station ID is displayed here. It indicates the KM0032's position in a daisy chained installation. The first station in the chain has a Station ID of 01; the second has a Station ID of 02, etc.
Page 25: Km0532 / Km0932 Rear View
Terminal CHAIN OUT Port The CHAIN OUT port is used to connect the daisy chain cable to the CHAIN IN port of a daisy chained KM0032 switch (see page 28). LAN Port The cable from the LAN, WAN, or Intranet plugs in here.
Page 26: Km0032 Rear View
Contact your dealer for more details. KVM Ports The Cat 5e or Cat 6 cables that link the KM0032 to the KVM Adapter Cables (which connect to the computers – see page 20), plug in here.
Page 27: Chapter 2. Hardware Setup
Consoles, page 5. For a listing of compatible KVM adapter cables, see Cables, page 6. As a cost-saving feature, KM0032 switches, can be daisy chained down from a KM0532 or KM0932. Since devices connected to them are accessed through one of the KM0532 or KM0932 consoles, they don’t require a console of their...
Page 28: Stacking
Keyboard Power On function. Stacking and Rack Mounting The KM0032 / KM0532 / KM0932 can be stacked on the desktop or rack mounted in a variety of ways. The following sections take you through the procedures for each method.
Page 29: Rack Mounting
Chapter 2. Hardware Setup Rack Mounting The KM0032 / KM0532 / KM0932 can be mounted in a 19" (1U) rack. The mounting brackets can screw into either the front or the back of the unit so that it can attach to the front or the back of the rack.
Page 30 KM0032 / KM0532 / KM0932 User Manual 3. Position the device in the front of the rack and align the holes in the mounting brackets with the holes in the rack. 4. Screw the mounting brackets to the rack. Note: Cage nuts are provided for racks that are not prethreaded.
Page 31: Rack Mounting - Rear
Chapter 2. Hardware Setup Rack Mounting - Rear To mount the unit at the rear of the rack, do the following: 1. Remove the two screws at the rear of the unit: Phillips head hex M3 x 6 2. Use the M3 x 8 Phillips head hex screws supplied with the rack mounting kit to screw the rack mounting brackets into the rear of the unit: Phillips head hex M3 x 8...
Page 32 KM0032 / KM0532 / KM0932 User Manual 3. Position the device in the rack and align the holes in the mounting brackets with the holes in the rack. 4. Screw the mounting brackets to the rear of the rack. Note: Cage nuts are provided for racks that are not prethreaded.
Page 33: Grounding
To prevent damage to your installation it is important that all devices are properly grounded. Use a grounding wire to ground the KM0032 / KM0532 / KM0932 by connecting one end of the wire to the switch’s grounding terminal (see...
Page 34: Single Level Installation
KM0032 / KM0532 / KM0932 User Manual Single Level Installation In a single level installation, there are no additional KVM switches cascaded or daisy chained down from the first level KVM switch. To set up a single level installation, refer to the diagram on page 21 (the numbers in the diagrams correspond to the numbered steps) and do the following: 1.
Page 35: Single Level Installation Diagram
Chapter 2. Hardware Setup 7. Ground the switch. Use a grounding wire to ground the unit by connecting one end of the wire to the grounding terminal, and the other end of the wire to a suitable grounded object. Note: Do not omit this step. Proper grounding helps to prevent damage to the unit from surges or static electricity.
Page 36: Multilevel Installations
KM0032 / KM0532 / KM0932 User Manual Multilevel Installations You can greatly expand the number of computers that can be added to your installation by performing a multilevel installation. The KM0532 / KM0932 supports two types of multilevel installation: Cascading...
Page 37: Cascading
Chapter 2. Hardware Setup Cascading KM0532 and KM0932 switches support a 3 level cascade for KM0532 / KM0932 units. They support a 1 level cascade for other compatible model KVM switches (see Supported KVM Switches, page 190). In other words, slave switches cannot be cascaded from non-KM0532 / KM0932 switches.
Page 38: Cascading Km0532 / Km0932 Switches
KM0032 / KM0532 / KM0932 User Manual Cascading KM0532 / KM0932 Switches Note: The firmware version of all cascaded KM0532 / KM0932s should match the firmware version of the first level KM0532 / KM0932. To cascade KM0532 / KM0932 switches refer to the installation diagram on page 25 and do the following: 1.
Page 39 Chapter 2. Hardware Setup 10. Plug the power adapters supplied with the console modules into an appropriate AC power source, and then plug the power adapter cables into the power jacks on the rear of the console modules. 11. Turn on the power to all the computers. Cascaded KM0532 / KM0932 Installation Diagram Console Module Console Module...
Page 40: Cascading Other Kvm Switches
KM0032 / KM0532 / KM0932 User Manual Cascading Other KVM Switches To cascade KVM switches other than the KM0532 or KM0932, a KVM adapter cable is required. The adapter cable converts the KM0532 / KM0932’s port signals to ones appropriate for the connectors on the KVM switch that you are cascading.
Page 41: Daisy Chaining
2. Follow the instructions given for single level installation to connect computers, LAN, power cords, etc. (see page 20). 3. For any other KM0032 switches you want to add to the chain, use a daisy chain cable (see Connecting Cables, page 6), to connect the Chain Out port of the parent switch to the Chain In port of the child switch.
Page 42: Network Administration
The use of RJ-45 KVM port connectors, combined with Auto Signal Compensation (ASC), allow signals to travel up to 300 meters (1000 feet) and still maintain reliability and high video resolution. This allows the KM0032 / KM0532 / KM0932 installation to take advantage of the internal Cat 5e and Cat 6 wiring built-in to most modern commercial buildings.
Page 43: The Adapter Id Function
Chapter 2. Hardware Setup The Adapter ID Function Adapter Cable information (the Adapter ID, port name, OS, keyboard language, and access mode), is stored on the adapter. The switch’s Adapter ID function takes this information and stores it along with the adapter cable’s configuration information (access rights, etc.), in its database –...
Page 44 KM0032 / KM0532 / KM0932 User Manual This Page Intentionally Left Blank...
Page 45: Super Administrator Setup
Chapter 3 Super Administrator Setup Overview The KM0032 / KM0532 / KM0932 supports three types of user, as shown in the table, bellow: User Type Role Super Administrator Access and manage ports and devices. Manage Users and Groups. Configure the overall installation. Configure personal working environment.
Page 46 KM0032 / KM0532 / KM0932 User Manual Since this is the first time you are logging in, key in the default Username: ADMINISTRATOR; and the default Password: password. Note: For security purposes, you should change the password. (See Changing the Super Administrator Login, page 34 for details.)
Page 47: Network Configuration
Chapter 3. Super Administrator Setup Network Configuration To set up the network, do the following: 1. Click the Device Management tab. 2. Select Network on the menu bar. A screen similar to the one below appears: 3. Fill in the fields according to the information provided under Network, page 54.
Page 48: Changing The Super Administrator Login
KM0032 / KM0532 / KM0932 User Manual Changing the Super Administrator Login To change the default Super Administrator Password, do the following: 1. Click the Port Access tab. 2. Select Preferences on the menu bar. 3. Key the old password into the Old Password field.
Page 49: Moving On
Chapter 3. Super Administrator Setup Moving On After setting up the network and changing the default Super Administrator username and password, you can proceed to other administration activities. These include User Management, Device Management, and Firmware Upgrade Maintenance. These activities can be accomplished either from the console or from a web browser.
Page 50 KM0032 / KM0532 / KM0932 User Manual This Page Intentionally Left Blank...
Page 51: Chapter 4 Logging In
Chapter 4 Logging In Overview The KM0032 / KM0532 / KM0932 switch can be accessed from a local console or an internet browser. Browser access is provided for convenience in performing administrative tasks from a remote location. Port switching and port operation procedures can only be performed from a console.
Page 52: Browser Login
The KM0532 or KM0932 can be accessed via an Internet browser from any platform. Note: 1. The KM0032 is installed as a daisy chained extension to a KM0532 or KM0932, and cannot be accessed directly. It can only be accessed via a login to the switch it is daisy chained from (a KM0532 or KM0932).
Page 53: Chapter 5. The User Interface
Chapter 5 The User Interface Overview Once you have successfully logged in the KM0532 or KM0932’s GUI Main Page appears. The look of the page varies slightly, depending on which method, Console or Web, you used to log in. Each of the interfaces is described in the sections that follow.
Page 54: Console Ui Page Components
The Console UI page components are described in the table below: Item Description Tab Bar The tab bar contains the KM0032 / KM0532 / KM0932’s main operation categories. The items that appear in the tab bar are determined by the user’s type, and the authorization options that were selected when the user’s account was created.
Page 55: Console Ui Keyboard Navigation
Chapter 5. The User Interface Console UI Keyboard Navigation You can navigate the Console UI from the keyboard. The hotkey combinations, and their effects, are shown in the table, below: Focus Hotkey Effect Miscellaneous Brings up the About screen. Logs you out of the session. The Tab Bar Ctrl P Selects the Port Access tab.
Page 56: The Browser Ui
(see Browser Login, page 38), the Web Browser Main Page comes up, with the Port Access page displayed: Note: 1. The KM0032 is installed as a daisy chained extension to a KM0532 or KM0932, and cannot be accessed directly. It can only be accessed via a login to the switch it is daisy chained from (a KM0532 or KM0932).
Page 57: Browser Ui Page Components
The web page screen components are described in the table, below: Item Description Tab Bar The tab bar contains the KM0032 / KM0532 / KM0932’s main operation categories. The items that appear in the tab bar are determined by the user’s type, and the authorization options that were selected when the user’s account was created.
Page 58 KM0032 / KM0532 / KM0932 User Manual This Page Intentionally Left Blank...
Page 59: Chapter 6. Device Management
Chapter 6 Device Management Overview The Device Management page allows super administrators to configure and control overall KM0032 / KM0532 / KM0932 operations. Note: This page is for super administrators only. Other users can skip this chapter. Device When you click the Device Management tab, the GUI opens with the Device menu page displayed.
Page 60 KM0032 / KM0532 / KM0932 User Manual Browser UI The Device Management settings are described in the table, below: Item Meaning General Device Name Allows you to give the switch a name. This can be convenient by helping you to distinguish among the various switches in a large, cascaded installation.
Page 61 Chapter 6. Device Management Item Meaning Root Web Session When a user is logged in via a web browser and there is Device Timeout no input from the user for the amount of time set with this Settings function, the user is automatically logged out and will need to log in again.
Page 62: Dual Root
KM0032 / KM0532 / KM0932 User Manual Dual Root With Dual Root two KM0532/KM0932 switches can discover and synchronize their databases, extending support to 18 Console Modules. A Dual Root setup also allows 2nd and 3rd level cascading for increased control of up to 1024 servers, administered by a Dual Root 18 Console Module setup.
Page 63 Chapter 6. Device Management Dual Root Layer 1 Installation Up to 9 Up to 9 Console Modules Console Modules KA7240/KA7230 KA7240/KA7230 KM0932 Dual Root Slave KM0932 Dual Root Master Dual Root Layer 1 Installation Network...
Page 64: Dual Root Cascading
KM0032 / KM0532 / KM0932 User Manual Dual Root Cascading Dual Root cascading allows switches to be added to your Dual Root Master and Slave setup to support additional KVM Ports. Before setting up switches in a Dual Root Cascade, you must first set up the Dual Root Master and Dual Root Slave Switches that make up Layer 1 (See Dual Root, page 48 for details).
Page 65 Chapter 6. Device Management Dual Root Cascade Installation Network Dual Root Slave Dual Root Master Cat 5e UTP Cat 5e UTP Cable Cable Layer...
Page 66 KM0032 / KM0532 / KM0932 User Manual Dual Root Layer 3 Installation Dual Root Master Dual Root Slave Cat 5e UTP Cat 5e UTP Cable Cable Layer To Cascade additional switches from Layer 2 in a Dual Root setup, you must make (8) KVM Port to (8) Console Port connections for each Layer 3 switch added.
Page 67: Ka7178 Dual Output Dongle
Chapter 6. Device Management KA7178 Dual Output Dongle The KA7178 Adapter Cable provides two Cat 5e/6 connectors, allowing a computer to connect to two KM0032, KM0532, or KM0932 switches. This allows consoles on different switches access to the same computer, as shown below.
Page 68: Network
KM0032 / KM0532 / KM0932 User Manual Network The Network page is used to specify the KM0032 / KM0532 / KM0932's network environment. Console UI...
Page 69 Chapter 6. Device Management Browser UI...
Page 70: Ip Installer
IP Installer utility. See IP Installer, page 185, for IP Installer details. Note: 1. If you select View Only, you will be able to see the KM0032 / KM0532 / KM0932 in the IP Installer’s Device List, but you will not be able to change the IP address.
Page 71: Dns Server
Chapter 6. Device Management DNS Server For automatic DNS Server address assignment, select the Obtain DNS Server Address Automatically radio button. To specify the DNS Server address manually, select the Set DNS Server Address Manually radio button, and fill in the addresses for the Preferred and Alternate DNS servers with values appropriate for your network.
Page 72: Anms
KM0032 / KM0532 / KM0932 User Manual ANMS The ANMS (Advanced Network Management Settings) page is divided into four sections; Event Destination, RADIUS settings, LDAP/AD settings, and TACACS settings shown, below: Console UI...
Page 73 Chapter 6. Device Management Browser UI...
Page 74: Smtp Settings
KM0032 / KM0532 / KM0932 User Manual SMTP Settings The KM0032 / KM0532 / KM0932 can send reports from an SMTP server. To have the KM0032 / KM0532 / KM0932 email reports from the SMTP server to you, do the following: 1.
Page 75: Radius Settings
Chapter 6. Device Management SNMP Server To be notified of SNMP trap events, do the following: 1. Check Enable SNMP Agent. 2. Key in either the IPv4 address or domain name of the computer to be notified of SNMP trap events. 3.
Page 76 KM0032 / KM0532 / KM0932 User Manual LDAP/LDAPS Settings LDAP / LDAPS Authentication and Authorization Settings To allow authentication and authorization via LDAP / LDAPS, refer to the information in the table, below: Item Action Enable Put a check in the Enable checkbox to allow LDAP / LDAPS authentication and authorization.
Page 77: Tacacs Settings
Chapter 6. Device Management TACACS Settings TACACS Authentication and Authorization Settings To allow authentication and authorization via TACACS, refer to the information in the table, below: Item Action Enable Put a check in the Enable checkbox to allow TACACS+ authentication and authorization. Preferred Fill in the IP address and port number for the TACACS+ server.
Page 78: Association
KM0032 / KM0532 / KM0932 User Manual Association The Association page is used to associate a PN0108 PON (Power Over the NET™) power outlet with a KVM port on the Matrix KVM Switch. Once an association has been made, the power status of the device attached to the KVM port can be controlled from the Port Access page, rather than having to control the power status by opening a separate web session to the PN0108.
Page 79 Chapter 6. Device Management Browser UI...
Page 80 KM0032 / KM0532 / KM0932 User Manual The page is organized into three main sections, as described in the table, below: Page Section Description Associations This section is where you associate the PN0108 power outlet(s) with a KVM port on the Matrix KVM Switch.
Page 81 Chapter 6. Device Management clicking on it. The outlet ID and Name appear in the power supply list (Browser UI). – or – Drop down the Associated Power Supply 1 list to select the outlet you want to associate with the port, then click the Association button just to the right of the selection box.
Page 82 KM0032 / KM0532 / KM0932 User Manual 3. (Optional) If the device connected to the KVM switch port has a dual power supply, and if you wish to associate additional outlet ports with the secondary power supply, simply repeat step 2, by clicking Add to select another outlet you want to associate with the port.
Page 83 Chapter 6. Device Management You can also power control the device when you select its port from the Port → Access Connections page.
Page 84: Summary
KM0032 / KM0532 / KM0932 User Manual Summary Clicking the Summary tab brings up a page similar to the one below: Console UI Browser UI This page provides a sorted listing of the power associations that have been made via the Power Management page.
Page 85: Multiview
Chapter 6. Device Management MultiView MultiView supports multi-console port access to a computer using multiple video cards to connect to multiple ports on the switch. The MultiView page is divided into two sections Console Groups and IO Groups. Console UI Browser UI...
Page 86: Multiview Groups
KM0032 / KM0532 / KM0932 User Manual MultiView Groups For multiple consoles to simultaneously access a computer connected by multiple video cards to multiple ports on the switch, the consoles and ports must be added to groups. The consoles must be added to a Console Group and the ports must be added to an IO Group, respectively.
Page 87: Creating Console Groups
Chapter 6. Device Management Console UI: Add to IO Group 2. Click Save. Creating Console Groups To create a Console Group, do the following: 1. From the Console Groups section click Add, then drag and drop the associated consoles from the console list into the Main Console, Member 1, Member 2, and or Member 3 sections of the Console Group (Browser UI).
Page 88 KM0032 / KM0532 / KM0932 User Manual Browser UI: Add to Console Group Console UI: Add to Console Group 2. Click Save.
Page 89: Security
Chapter 6. Device Management Security The Security page is divided into 2 main panels, Login Settings and Account Policy, as described in the sections that follow. Console UI...
Page 90 KM0032 / KM0532 / KM0932 User Manual Browser UI...
Page 91 Chapter 6. Device Management Item Meaning Login Maximum Sets the number of failed login attempts that are allowed Login Failures before the user is locked out of further attempts to log in. Settings Checking Disabled allows an unlimited number of login failure attempts Lockout Period Sets the amount of time a user must wait after being locked out before being able to try logging in again.
Page 92: Date/Time
To set the time, use the 24 hour HH:MM:SS format. Time Zone To establish the time zone that the KM0032 / KM0532 / KM0932 is located in, drop down the Time Zone list and choose the city that most closely corresponds to where it is at.
Page 93: Current System Time
Chapter 6. Device Management When you have finished making your Date/Time page settings, click Save. Browser UI An explanation of the settings found on this page are as follows: Current System Time This section displays the time and date that the switch is currently set to. The time and date fields are for information purposes and cannot be edited.
Page 94: Time Zone
KM0032 / KM0532 / KM0932 User Manual New System Time Use these fields to change the switch’s time and date settings, as follows: To set the switch’s time and date to match the time and date of the computer you are logged in on, select the Synchronize with computer time radio button.
Page 95: System
System Console UI The Console UI’s System page provides system information, including the firmware version, regarding the KM0032 / KM0532 / KM0932 and the modules connected to it. Browser UI The Browser UI’s System page provides detailed information about the devices (KVM switches, Console Modules, and KVM Adapter Cables) deployed on the matrix KVM switch installation.
Page 96 KM0032 / KM0532 / KM0932 User Manual This Page Intentionally Left Blank...
Page 97: Chapter 7. User Management
Chapter 7 User Management Overview The User Management page allows super administrators and administrators to create, modify, and delete users and groups, as well as assign device authorizations to them. Up to 1024 accounts and 256 groups can be created. Note: 1.
Page 98 KM0032 / KM0532 / KM0932 User Manual Console UI Browser UI...
Page 99: Adding Users
Chapter 7. User Management The page is organized into two main areas. All users are listed in the Sidebar at the left of the page. The large panel at the right also lists the users, but provides more detailed information at-a-glance for each. Adding Users To add a user, do the following: 1.
Page 100 KM0032 / KM0532 / KM0932 User Manual Browser UI 4. Enter the required information for the user in the appropriate fields. A description of each of the fields is given in the table, below: 5. When your selections have been made click Save. When the operation completes, the new user appears in the Sidebar and the main panel.
Page 101 Permissions Virtual Media is only available to users. It gives them permission to use the KM0032 / KM0532 / KM0932’s virtual media function. See VM Mount:, page 112 for details. Power Management is only available to users. It allows them to access a Power on the Net™...
Page 102 KM0032 / KM0532 / KM0932 User Manual Field Description Status Status allows you to control the user’s account and access to the installation, as follows: Disable Account lets you suspend a user’s account without actually deleting it, so that it can be easily reinstated in the future.
Page 103: Modifying User Accounts
Chapter 7. User Management Modifying User Accounts To modify a user account, do the following: 1. Select Accounts on the menu bar. 2. In the Sidebar, click the user’s name – or – In the main panel, select the user’s name, then click Modify. 3.
Page 104: Groups
KM0032 / KM0532 / KM0932 User Manual Groups Groups allow administrators to easily and efficiently manage users and devices. Since device access rights apply to anyone who is a member of the group, administrators need only set them once for the group, instead of having to set them for each user individually.
Page 105 A minimum of 1 and a maximum of 16 characters is allowed. Permissions Virtual Media is only available to users. It gives them permission to use the KM0032 / KM0532 / KM0932’s virtual media function. See VM Mount:, page 112 for details. Power Management allows users to access a Power on the Net™...
Page 106: Modifying Groups
KM0032 / KM0532 / KM0932 User Manual 5. When your selections have been made click Save. When the operation completes, the new group appears in the Sidebar and the main panel. The main panel also shows whether the group status is currently active or has been disabled.
Page 107: Users And Groups
Chapter 7. User Management Users and Groups There are two ways to assign users to – and remove users from – groups: from the Users menu; and from the Group menu. Note: Before you can assign users to groups, you must first create them. See Adding Users, page 85 for details.
Page 108: Removing Users From A Group From The User Menu
KM0032 / KM0532 / KM0932 User Manual Browser UI 4. In the Available Groups column, select the group that you want the user to be in. 5. Click the Right Arrow to put the group’s name into the Selected Groups column.
Page 109 Chapter 7. User Management 3. In the page that comes up, select the Groups tab. A screen, similar to the one below, appears: Console UI...
Page 110 KM0032 / KM0532 / KM0932 User Manual Browser UI 4. In the Selected Groups column, select the group that you want to remove the user from. 5. Click the Left Arrow to remove the group’s name from the Selected Groups column. (It goes back into the Available Groups column.) 6.
Page 111: Assigning Users To A Group From The Group Menu
Chapter 7. User Management Assigning Users to a Group From the Group Menu To assign a user to a group from the Group menu, do the following: 1. Select Groups on the menu bar. 2. In the Sidebar, click the group’s name –...
Page 112 KM0032 / KM0532 / KM0932 User Manual Browser UI 4. In the Available Users column, select the user that you want to be a member of the group. 5. Click the Right Arrow to put the user’s name into the Selected Users column.
Page 113: Removing Users From A Group From The Group Menu
Chapter 7. User Management Removing Users From a Group From the Group Menu To remove a user from a group from the Group menu, do the following: 1. Select Groups on the menu bar. 2. In the Sidebar, click the group’s name –...
Page 114 KM0032 / KM0532 / KM0932 User Manual Browser UI 4. In the Selected Users column, select the user that you want to remove from the group. 5. Click the Left Arrow to remove the user’s name from the Selected Users column.
Page 115: Device Assignment
Chapter 7. User Management Device Assignment When a user logs in to the Matrix KVM Switch, the GUI comes up with the Port Access page displayed. All the ports that the user is permitted to access are listed in the Port Selection panel at the left of the page. Access permissions for those ports and the devices connected to them are assigned on a port-by-port basis from the User or Group list of the User Management page.
Page 116 KM0032 / KM0532 / KM0932 User Manual Browser UI Note: Only devices that are powered on appear in the list. 4. Switches and ports are listed in the left hand column. Select the port that you wish to configure the permissions for, then click a radio button to set...
Page 117: Assigning Device Permissions From The Group Menu
Chapter 7. User Management Heading Description View Only The user can only view the remote screen; he cannot perform any operations on it. Full Access The user can view the remote screen and can perform operations on the remote system from his keyboard and monitor.
Page 118 KM0032 / KM0532 / KM0932 User Manual This Page Intentionally Left Blank...
Page 119: Chapter 8 Port Access
Chapter 8 Port Access Overview When you log in to the switch the Port Access page comes up with the Connections page displayed. Console UI...
Page 120 KM0032 / KM0532 / KM0932 User Manual Browser UI...
Page 121: Page Layout
Chapter 8. Port Access Page Layout The Port Access page is organized into several main areas: All the ports that a user is permitted to access are listed in the Port Selection Sidebar at the left of the page. At the bottom of the Sidebar, there is a Show button that gives users control over which of their ports appear in the tree The main panel provides a detailed listing of each port, as well as a means of accessing the ports.
Page 122 KM0032 / KM0532 / KM0932 User Manual Console UI When you right click on a port in the Browser UI, a small button pops up offering to let you add the port to your Favorites list, and, if the port has been named, to erase the port’s name.
Page 123: Show
Chapter 8. Port Access Show When you click Show, at the bottom of the Sidebar, several input methods appear that allow you to control the number and type of ports that display in the Sidebar tree, as well as which ports get scanned when Auto Scan Mode is invoked (see Auto Scanning, page 140): Console UI / Browser UI The meanings of the choices are explained in the table, below:...
Page 124: Connections
KM0032 / KM0532 / KM0932 User Manual Connections The Connections page displays port status information at the device level, and port connection configuration options at the port level. In addition the Console Selector tab can be used to force one or more consoles to connect to a specific computer using a matrix chart.
Page 125 Chapter 8. Port Access Browser UI The column headings and their meanings are described in the table, below: Heading Meaning Port Number The port’s number on the switch. Port Name If a name has been assigned to a port it displays here. Status The current status of the port –...
Page 126: Port Level
KM0032 / KM0532 / KM0932 User Manual Port Level When a port is selected in the Sidebar tree, the Connections page changes to display the port’s attributes and connection options: Console UI Port Attributes: The port attributes are read only, and are for your reference. The attributes are configured on the Port Access Properties page (see page 129).
Page 127: Associated Link
Chapter 8. Port Access Browser UI Port Attributes: The port attributes are read only, and are for your reference. The attributes are configured on the Port Access Properties page (see page 129). Associated Link If a PN0108 PON (Power Over the NET™) power outlet port has been associated with this port (see Association, page 64), you can control its power status from this page by clicking the socket icon.
Page 128: Console Selector
KM0032 / KM0532 / KM0932 User Manual Console Selector The Console Selector tab allows Administrator’s the ability to force multiple consoles to connect to selected ports using a graphical index chart. The Console Selector tab lists the connected consoles and ports in a cross reference index with selector buttons.
Page 129 Chapter 8. Port Access Browser UI Explanations of each Console Selector option are given in the table below: Setting Function Profile Use the pull-down box to Import or Save connection arrangements. Up to 16 predefined profiles can be stored (Save) and later recalled (Import). Profile names can be changed.
Page 130: Favorites
KM0032 / KM0532 / KM0932 User Manual Favorites The Favorites page is similar to a bookmarks feature. Ports that you frequently visit can be saved in a list here. Simply open this page and select the port – rather than hunting for it in the Sidebar. In addition, you can limit the ports that get scanned under Scan Mode, to just the ones you have selected as Favorites (see Scan Mode, page 122).
Page 131: Adding A Favorite
Chapter 8. Port Access Adding a Favorite Console GUI: To add a favorite under the Console GUI, first select the port in the Sidebar, then click Add (at the bottom of the main panel). Browser GUI: To add a favorite under the Browser GUI: Right click on the port in the Sidebar, then click the Add to Favorites button that appears.
Page 132 KM0032 / KM0532 / KM0932 User Manual Browser UI...
Page 133: Preferences
Chapter 8. Port Access Preferences The Preferences page allows users to set up their own, individual, working environments. The Matrix KVM Switch stores a separate configuration record for each user profile, and sets up the working configuration according to the Username that was keyed into the Login dialog box.
Page 134 KM0032 / KM0532 / KM0932 User Manual Browser UI...
Page 135: Changing The Preference Settings
Chapter 8. Port Access Changing the Preference Settings Make your settings changes according to the information given in the following table: Setting Function Language Selects the language that the interface displays in. Drop down the list of available languages to choose the one you want. Toolbar Selects which Hotkey controls the Toolbar: [Scroll Lock] [Scroll Lock], or Hotkey...
Page 136 KM0032 / KM0532 / KM0932 User Manual Setting Function Welcome If this is enabled, a welcome message appears at the right side of the Message menu bar. If it is disabled, no welcome message appears. When the (Browser UI) function is enabled, if you put a check in the Username checkbox, the user’s name appears with the welcome message.
Page 137: Multicast Audio
Chapter 8. Port Access Multicast Audio The Multicast Audio feature allows multiple users accessing the same KVM port to listen to the audio being played from it, thus a single KVM port can broadcast its audio to multiple console module speakers which are connected to it, at the same time.
Page 138: Sessions
KM0032 / KM0532 / KM0932 User Manual Sessions The Session page lets the administrator see at a glance all the users currently logged into the Matrix KVM Switch, and provides information about each of their sessions. Console UI Browser UI...
Page 139: Kill Session
Chapter 8. Port Access The meanings of the headings at the top of the page are fairly straightforward. The headings that might need further explanation are as follows: The information under the Service heading indicates whether the user has logged in via a browser connection (HTTPS), or from a local console. The information under the Console/IP heading indicates: For Console connections: The console’s name followed by a slash, and then the console port number on the switch it is connected to.
Page 140 KM0032 / KM0532 / KM0932 User Manual While Broadcast Mode is in effect, the mouse will not function normally. You must exit Broadcast Mode in order to regain control of the mouse. To exit Broadcast Mode, invoke the GUI (with the Hotkey); select Broadcast...
Page 141: Access
Chapter 8. Port Access Access The Access page is used to set user and group access rights on a port-by-port basis. Console UI Browser UI...
Page 142 KM0032 / KM0532 / KM0932 User Manual Users and Groups are listed on separate pages – click the appropriate tab at the top of the panel to switch between the pages. To set a user’s access rights for a port, first select the port in the Sidebar tree, then check the appropriate radio buttons in the user’s row.
Page 143: Properties
Chapter 8. Port Access Properties Configuring Port Properties To configure a port’s properties, bring up the Port Properties configuration page, as follows: 1. Under the Port Access tab, select the Properties menu item. 2. Click on the port in the Sidebar –...
Page 144 KM0032 / KM0532 / KM0932 User Manual Browser UI: Port Setting List...
Page 145 Chapter 8. Port Access Console UI: Port Properties Browser UI: Port Properties...
Page 146 KM0032 / KM0532 / KM0932 User Manual An explanation of the configuration fields is given in the table, below: Field Explanation Port Name For convenience – especially in large installations with many switches and ports – each switch and each port can be given a name.
Page 147: Ka7140 Properties
KA7140 Properties When a KA7140 Adapter Cable is used to connect a serial device to the KM0032 / KM0532 / KM0932, in addition to the usual parameters, serial parameters need to be configured, as well. To configure the KA7140 to interact...
Page 148: Restore Defaults
KM0032 / KM0532 / KM0932 User Manual 4. Drop down each of the serial parameter lists to select the port property values that match the ones used by the connected serial console device. The port property settings that the KA7140 supports are given in the...
Page 149: Pon
Chapter 8. Port Access If a Power over the NET™ (PON) module is connected to your installation clicking the PON menu item starts a Java Applet viewer that brings up its interface – allowing you to remotely power manage servers connected to the Matrix KVM Switch.
Page 150 KM0032 / KM0532 / KM0932 User Manual This Page Intentionally Left Blank...
Page 151: Console Port Operation
Chapter 9 Console Port Operation Overview After you have successfully logged in (see above Logging In, page 37), the Matrix KVM Switch comes up with the Port Access tab's Connections page displayed. Note: Port operations can only be performed from the Console UI. The Browser UI is for configuration purposes only.
Page 152: The Port Toolbar
KM0032 / KM0532 / KM0932 User Manual The Port Toolbar The switch interface provides a toolbar to help you with port switching operations from within the captured port. To bring up the toolbar, tap the Toolbar Hotkey (Scroll Lock or Ctrl), twice. The toolbar appears at the upper...
Page 153: The Toolbar Icons
Chapter 9. Console Port Operation The Toolbar Icons The meanings of the toolbar icons are explained in the table below. Icon Purpose Click to switch to the station previous to the current one in the Sidebar tree. Click to switch to the station that comes after the current one in the Sidebar tree.
Page 154: Toolbar Hotkey Port Switching
KM0032 / KM0532 / KM0932 User Manual Toolbar Hotkey Port Switching When the toolbar displays, you can use hotkeys to provide KVM focus to a port directly from the keyboard. The Matrix KVM Switch provides the following hotkey features: Auto Scanning...
Page 155: Skip Mode Switching
Chapter 9. Console Port Operation To Resume Auto Scanning after a pause, press any key except [Esc] or the [Spacebar]. Scanning continues from where it left off. While Auto Scan Mode is in effect, ordinary keyboard functions are suspended. You must exit Auto Scan Mode in order to regain normal control of the keyboard.
Page 156: Keyboard Hotkey Port Switching
(described in the sections that follow), can be input. Pressing [Esc] exits Hotkey Mode. Port ID Numbering Each computer on a KM0032 / KM0532 / KM0932 installation has a unique Port ID that reflects the position it occupies in the overall installation. For example: A computer connected to KVM Port 15 of a first stage KM0532 / KM0932 would have a Port ID of 15.
Page 157: Push Video Hotkey
Chapter 9. Console Port Operation Push Video Hotkey The Push Video feature allows a user to push their console’s port connection to another console for viewing or operating in a Share or Occupy mode. To do so; invoke the Hotkey Mode (see above Keyboard Hotkey Port Switching, page 142) and enter the letter P followed by the console number you wish to push your video to.
Page 158: Hotkey Summary Table
KM0032 / KM0532 / KM0932 User Manual Hotkey Summary Table The following table summarizes Hotkey operations on the KM0032 / KM0532 / KM0932: Invocation Hotkey Action [Num Lock] + [-] [Port ID] [Enter] Switches access to the computer that corresponds to that Port ID.
Page 159: Chapter 10 Log
Chapter 10 Overview The Matrix KVM Switch logs all the events that take place on it. The log stores a maximum of 512 events. When the limit is reached, the oldest events get discarded as new events come in. To view the contents of the log, click the Log icon.
Page 160: Console Ui
KM0032 / KM0532 / KM0932 User Manual Browser UI Console UI A listing of the events that have been recorded in the log file appear in the main panel: the time of the event is listed in the left column; a description of the event that occurred at that time is listed to the right.
Page 161 Chapter 10. Log A description of the items is given in the table, below: Item Description Today Select this radio button to filter results for records from the current day only. Select this radio button to filter results for all the records in the log file.
Page 162: Browser Ui
KM0032 / KM0532 / KM0932 User Manual Browser UI Like the Console page, the events that have been recorded in the log file appear in the main panel: the time of the event is listed in the left column; a description of the event that occurred at that time is listed to the right.
Page 163: Chapter 11. The Log Server
Log Server. Installation 1. Log into the KM0032 / KM0532 / KM0932 switch. 2. Click the Download tab and download the Log Server AP program. 3. Go to the location on your hard disk that you downloaded the Log Server program to, and double click its icon (LogSetup.exe) to bring up the...
Page 164: Starting Up
KM0032 / KM0532 / KM0932 User Manual Starting Up To start the Log Server, either double click the program icon, or key in the full path to the program on the command line. The first time you run it, a screen similar to the one below appears: Note: 1.
Page 165: The Menu Bar
Chapter 11. The Log Server The Menu Bar The Menu bar consists of four items: Configure Events Options Help These are discussed in the sections that follow. Note: If the Menu Bar appears to be disabled, click in the List window to enable it.
Page 166: Events
KM0032 / KM0532 / KM0932 User Manual A description of the fields is given in the table, below: Field Explanation Address This can either be the IP address of the computer the Log Server is running on, or its DNS name.
Page 167: Maintenance
Chapter 11. The Log Server A description of the items is given in the table, below: Item Description New search This is one of three radio buttons that define the scope of the search. If it is selected, the search is performed on all the events in the database for the selected unit.
Page 168: Options
KM0032 / KM0532 / KM0932 User Manual Options Network Retry allows you to set the number of seconds that the Log Server should wait before attempting to connect if its previous attempt to connect failed. When you click this item, a dialog box x, similar to the one below, appears: Key in the number of seconds, then click OK to finish.
Page 169: The Log Server Main Screen
Chapter 11. The Log Server The Log Server Main Screen Overview The Log Server Main Screen is divided into two main panels. The upper (List) panel lists all of the units that have been selected for the Log Server to track. The lower (Event) panel displays the tick information for the currently selected unit.
Page 170: The List Panel
KM0032 / KM0532 / KM0932 User Manual The List Panel The List panel contains six fields: Field Explanation Recording Determines whether the Log Server records the ticks for this unit, or not. If the Recording checkbox is checked, the field displays Recording, and the ticks are recorded.
Page 171: Chapter 12 Maintenance
Browser UI The browser session offers three menu items: Backup/Restore, Firmware Upgrade and Certificates: Backup/Restore allows super administrators to backup KM0032 / KM0532 / KM0932 system configuration settings to a file, and restore configuration settings from previously saved files. Firmware Upgrade allows super administrators to upgrade firmware for connected Matrix KVM Switches, attached console modules, and KVM adapter cables.
Page 172: Backup
KM0032 / KM0532 / KM0932 User Manual The operations performed in the backup/restore procedures are described in the table, below: Procedure Operation Backup Backs up the system configuration – including master station settings, user and group accounts, user profiles, port access rights, and favorites.
Page 173: Restore
Chapter 12. Maintenance 4. Navigate to the directory where you want to save the file and click Save. Restore To restore system configuration settings, do the following: 1. In the Restore panel, click Browse. 2. Navigate to the directory where the backup file is located and select it. 3.
Page 174: Firmware Upgrade
KM0032 / KM0532 / KM0932 User Manual Firmware Upgrade New firmware versions can be downloaded from our website as they become available. Check the website regularly, to find the latest upgrade packages. Under Firmware Upgrade the following devices get upgraded simultaneously:...
Page 175 Chapter 12. Maintenance 4. Click Yes to continue. After a short while, the Firmware Upgrade page comes up: All the stations, consoles and KVM adapters that are capable of being upgraded are listed. Note: Only online stations and consoles, as well as KVM adapters connected to online devices show up in the list.
Page 176: Firmware Upgrade Recovery
KM0032 / KM0532 / KM0932 User Manual Firmware Upgrade Recovery Should the switch’s firmware upgrade procedure fail, and the switch becomes unusable, the following firmware upgrade recovery procedure will resolve the problem: 1. Power off the switch. 2. Press and hold the Reset Switch in (see Reset Switch, page 9 for details).
Page 177: Certificates
For enhanced security, the Private Certificate section allows you to use your own private encryption key and signed certificate, rather than the default ATEN certificate. There are two methods for establishing your private certificate: generating a self-signed certificate;...
Page 178 KM0032 / KM0532 / KM0932 User Manual Note: 1. Clicking Restore Default returns the device to using the default ATEN certificate. 2. Both the private encryption key and the signed certificate must be imported at the same time.
Page 179: Console Ui
Chapter 12. Maintenance Console UI EDID Information/Update The console session’s Maintenance function has two tabs: Monitor Information, and Update Adapter: Note: Only Super Administrators can use Maintenance functions. Monitor Information The Monitor Information tab provides the console’s EDID (Extended Display Identification Data) which includes;...
Page 180 KM0032 / KM0532 / KM0932 User Manual Update Adapter The Update Adapter tab allows a user to manually update a computers KVM Adapter by sending its EDID information (including monitor resolution) to the dongle for display optimization. To update a computers KVM Adapter simply select it on the Computer/ KVM Adapter list and click: Send.
Page 181: Rs-232 Port Operation
Chapter 13 RS-232 Port Operation Overview RS-232 port operation allows Super Administrators or Administrators to establish a serial terminal login to the KM0532 / KM0932 from their computer’s COM port to a Console Module’s RS-232 port. This allows a Super Administrator or Administrator to monitor the usage of all the consoles and all the ports from a single access point.
Page 182: Connecting
KM0032 / KM0532 / KM0932 User Manual Connecting Once you establish a connection via your terminal program, the command screen comes up. 1. Press [Enter] to bring up the Username prompt. 2. Key in your username, then press [Enter] to bring up the Password prompt.
Page 183: Restrictions
Chapter 13. RS-232 Port Operation Restrictions Only Super Administrators and Administrators can use this function. It is not available to ordinary users. Super Administrators or Administrators must log in through a serial terminal connection (such as HyperTerminal). A regular login connection (by any user) between the Console Module being used for the RS-232 login and the KM0532 / KM0932 must be established before the RS-232 login attempt.
Page 184: Command Summary
KM0032 / KM0532 / KM0932 User Manual Command Summary A description of the commands supported with this function is provided in the table below: Command Description This is the Auto Scan Mode command. It is followed by a string that specifies the console, duration, and ports you want to auto scan (see AS, page 172 for details).*...
Page 185 Chapter 13. RS-232 Port Operation * Only online ports that are available to the users that are logged into the Console Module(s) are shown with this command. Examples of the commands are given in the sections that follow.
Page 186: Example 1 - Normal Scan
Where: XX is a two-digit number that represents the console number on the KM0032 / KM0532 / KM0932 you want Auto Scan Mode started. YY represents the scan duration in seconds that Auto Scan Mode will pause for between each port scan.
Page 187: Example 1 - Single Stage Installation
Chapter 13. RS-232 Port Operation This command is used to switch the KVM focus to a particular port. The generic format of this command is: SP XX YY ZZ Where: XX is a two-digit number that represents the console port number on the KM0532 / KM0932 that the Console Module you wish to access connects YY represents either a KVM port number on the KM0532 / KM0932 that the Console Module connects to;...
Page 188 KM0032 / KM0532 / KM0932 User Manual Example 3 – Daisy Chained Installation: SP 08 C3 12 This command switches the KVM focus of the session running on Console Port 8 from the port it is currently on to KVM Port 12 of a switch that occupies Station 3 in a daisy chain.
Page 189 Chapter 13. RS-232 Port Operation This command is used to list the KVM port information for all or specified switch ports. The LP command lists the port #, Power On / Off, and port name. The available command are: LP ALL LP ON LP OFF LP XX...
Page 190 KM0032 / KM0532 / KM0932 User Manual This command is used to list the KVM ports that are available on a particular Console Module. The command takes two forms: LI XX LI ALL Where: XX is a two-digit number that represents the console port number on the...
Page 191 Chapter 13. RS-232 Port Operation This command is used to list the user profiles of the users that have logged into the KM0532 / KM0932 installation via the Console Modules. that are available on a particular Console Module. The command takes two forms: LU XX LU ALL Where:...
Page 192: Response Messages
KM0032 / KM0532 / KM0932 User Manual Response Messages After sending RS-232 commands to the KVM switch, the switch will provide a response message notifying the administrator of the status of the action taken. Below is a list of the possible response messages and their meaning.
Page 193: Appendix
Appendix Safety Instructions General This product is for indoor use only. Read all of these instructions. Save them for future reference. Follow all warnings and instructions marked on the device. Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result.
Page 194 KM0032 / KM0532 / KM0932 User Manual If an extension cord is used with this device make sure that the total of the ampere ratings of all products used on this cord does not exceed the extension cord ampere rating. Make sure that the total of all products plugged into the wall outlet does not exceed 15 amperes.
Page 195: Rack Mounting
Appendix Rack Mounting Before working on the rack, make sure that the stabilizers are secured to the rack, extended to the floor, and that the full weight of the rack rests on the floor. Install front and side stabilizers on a single rack or front stabilizers for joined multiple racks before working on the rack.
Page 196: Technical Support
KM0032 / KM0532 / KM0932 User Manual Technical Support International For online technical support – including troubleshooting, documentation, and software updates: http://support.aten.com For telephone support, see Telephone Support, page iii: North America Email Support support@aten-usa.com Online Troubleshooting http://www.aten-usa.com/support Technical Documentation...
Page 197: Trusted Certificates
Appendix Trusted Certificates Overview When you try to log in to the device from your browser, a Security Alert message appears to inform you that the device’s certificate is not trusted, and asks if you want to proceed. The certificate can be trusted, but the alert is triggered because the certificate’s name is not found on the Microsoft list of Trusted Authorities.
Page 198: Self-Signed Private Certificates
KM0032 / KM0532 / KM0932 User Manual Self-Signed Private Certificates If you wish to create your own self-signed encryption key and certificate, a free utility – openssl.exe – is available for download over the web at www.openssl.org. To create your private key and certificate do the following: 1.
Page 199: Ip Address Determination
If you are an administrator logging in for the first time, you need to access the KM0032 / KM0532 / KM0932 in order to give it an IP address that users can connect to. There are three methods to choose from. In each case, your computer must be on the same network segment as the KM0032 / KM0532 / KM0932.
Page 200: Browser
2. Specify the switch's default IP address (192.168.0.60) in your browser, and you will be able to connect. 3. Assign a fixed IP address for the KM0032 / KM0532 / KM0932 that is suitable for the network segment that it resides on.
Page 201: Troubleshooting
General Problem Solution I can’t use the KA9222 or The KM0032 / KM0532 / KM0932 does not support these KA9272 Console Modules two console modules. Instead, use the KA7230, and with the KM0032 / KM0532 KA7240 Console Modules with the KM0032 / KM0532 / / KM0932.
Page 202 KM0032 / KM0532 / KM0932 User Manual Problem Solution The firmware upgrade See Firmware Upgrade Recovery, page 162. process was prematurely aborted and now some of the modules are inoperable. I can't upgrade the firmware Make sure that you have selected the correct firmware version.
Page 203: Sun Systems
Appendix Sun Systems Problem Solution Video display problems The display resolution should be set to 1024 x 768 @ with HDB-15 interface 60Hz. systems (e.g. Sun Blade Under Text Mode: 1000 servers). 1. Enter the ok prompt (see below) and issue the follow- ing firmware commands: setenv output-device screen:r1024x768x60 reset-all...
Page 204: Supported Kvm Switches
KM0032 / KM0532 / KM0932 User Manual Supported KVM Switches The table below lists KVM switches that are compatible with the KM0032 / KM0532 / KM0932 and the type of expansion that they use. (KVM switches listed below are sold separately. Contact your dealer for details.)
Page 205: Additional Connection Diagrams
Appendix The maximum distance between the first and last KVM switches in the daisy chain cannot exceed 50 meters. Additional Connection Diagrams Console Modules KA7230 KA7240...
Page 206: Kvm Adapter Cables
KM0032 / KM0532 / KM0932 User Manual KVM Adapter Cables KA7176 KA7120 / KA9120 KA7170 / KA9170 KA9130 KA7140 KA9140 SERIAL TERMINAL...
Page 207: Kvm Adapter Cables Cont
Appendix KVM Adapter Cables cont. KA7166 KA7168 KA7169 PON Setup PN0108...
Page 208: Km0532 / Km0932 Specifications
KM0032 / KM0532 / KM0932 User Manual KM0532 / KM0932 Specifications Function KM0532 KM0932 Computer Direct Connections Console Connections Port Selection GUI, Hotkeys Connectors Console Port 5 x RJ-45 Female 9 x RJ-45 Female KVM Port 32 x RJ-45 Female...
Page 209: Km0032 Specifications
Appendix KM0032 Specifications Function KM0032 Computer Direct Connections Port Selection via daisy chain Connectors KVM Port 32 x RJ-45 Female Daisy chain 2 x VHDCI 68 Female (Black) F/W Recovery 1 x RJ-45 Female 1 x RJ-45 Female (Black) Power...
Page 210: Factory Default Settings
KM0032 / KM0532 / KM0932 User Manual Factory Default Settings The factory default settings are as follows (in alphabetical order): Setting Default Accessible Ports Super Administrators – Full for all ports All other users – None for all ports. Beeper On (Activated) Date &...
Page 211: Restoring Factory Default Settings
Appendix Restoring Factory Default Settings You can restore the factory default settings and the default login settings for the Matrix KVM Switch. Note: When restoring the default login settings, all super administrator, administrator, user, and group accounts are deleted. To restore the factory default settings (see page 196), or the default login settings, do the following: 1.
Page 212: Ka7140 Pin Assignments
KM0032 / KM0532 / KM0932 User Manual KA7140 Pin Assignments Pin assignments for the KA7140 Adapter are given in the table, below: Assignment DB9 Female About SPHD Connectors This product uses SPHD connectors for its KVM and/or Console ports. We have specifically modified the shape of these connectors so that only KVM cables that we have designed to work with this product can be connected.
Page 213: Limited Warranty
Appendix Limited Warranty ALTUSEN warrants this product against defects in material or workmanship for a period of one (1) year from the date of purchase. If this product proves to be defective, contact ALTUSEN's support department for repair or replacement of your unit. ALTUSEN will not issue a refund. Return requests can not be processed without the original proof of purchase.
Page 214 KM0032 / KM0532 / KM0932 User Manual This Page Intentionally Left Blank...
Page 215 Connection diagrams Favorites page, 116 Console modules, 191 Firmware upgrade recovery, 162 KVM Adapter cables, 192, 193 Front view Connections page, 110 KM0032, 10 Console modules, 5 KM0532/KM0932, 8 connection diagrams, 191 Console Port Operation, 137 Console UI Keyboard Grounding, 19...
Page 216 Browser, 38 KA7140 Pin Assignments, 198 Console, 37, 38 KA7140 Properties, 133 Login Keyboard navigation Invalid login, 37 Console UI, 41 KM0032, 10 front view, 10 MAC Address, 46 rear view, 12 Maintenance, 157 KM0532/KM0932 Modifying groups, 92 front view, 8...
Page 217 Rack Mounting Toolbar, 138 Front, 15 Hotkey port switching, 140 Rear, 17 Icons, 139 Rear view Toolbar hotkey, 121 KM0032, 12 troubleshooting, 187 KM0532/KM0932, 11 Trusted Certificates, 183 Requirements, 5 Operating Systems, 7 OS Support, 7 User Interface, 39 Restore defaults, 134...
Page 218 Index User Notice, iii removing from groups, 94, 99 Users Users and Groups, 93 assigning to groups, 93, 97...

This manual is also suitable for:

Km0532 Km0932

ATEN KM0032 User Manual

Chapter 1. Introduction

Chapter 2. Hardware Setup

Chapter 3

Super Administrator Setup

Chapter 4 Logging in

Chapter 5. The User Interface

Chapter 6. Device Management

Chapter 7. User Management

Chapter 8 Port Access

Chapter 9

Console Port Operation

Chapter 10 Log

Chapter 11. The Log Server

Chapter 12 Maintenance

Chapter 13

RS-232 Port Operation

Appendix

Quick Links

Need help?

Questions and answers

Related Manuals for ATEN KM0032

Summary of Contents for ATEN KM0032