Stacking - ATEN KM0932 User Manual

KM0032 / KM0532 / KM0932 User Manual
Before you Begin
1. Important safety information regarding the placement of this
device is provided on page 175. Please review it before
proceeding.
2. Make sure that power to all the devices you will be connecting
up has been turned off. You must unplug the power cords of any
computers that have the Keyboard Power On function.
Stacking and Rack Mounting
The KM0032 / KM0532 / KM0932 can be stacked on the desktop or rack
mounted in a variety of ways. The following sections take you through the
procedures for each method.

Stacking

The KM0032 / KM0532 / KM0932 can be placed on any appropriate level
surface that can safely support its weight plus the weight of its attached cables.
To place the switch, or to stack units if you are daisy chaining them, remove
the backing material from the bottom of the rubber feet that came with this
package, and stick them onto the switch's bottom panel at the corners, as
shown in the diagram, below:
Note: To ensure adequate ventilation, allow at least 5.1 cm on each side, and
12.7cm at the back for power cord and cable clearance.
14