Single Level Installation - ATEN KM0932 User Manual

KM0032 / KM0532 / KM0932 User Manual

Single Level Installation

In a single level installation, there are no additional KVM switches cascaded
or daisy chained down from the first level KVM switch. To set up a single level
installation, refer to the diagram on page 21 (the numbers in the diagrams
correspond to the numbered steps) and do the following:
1. Connect the KVM console.
Plug your keyboard, mouse, and monitor into their respective ports on the
console module. Each console port is marked with an identifying icon (see
page 188).
2. Connect the console module to the KM0532 / KM0932.
Use Cat 5e or Cat 6 cable to connect the LINE IN 1 or LINE IN 2 port of
the console module to one of the Console (User) ports on the KM0532 /
KM0932's rear panel.
(Repeat steps 1 and 2 for all KVM consoles that you wish to connect. Up
to 5 (KM0532), or 9 (KM0932) KVM consoles may be connected in this
fashion (1 port on the front panel, plus 4 or 8 ports on the rear panel.)
Note: The distance between any console module and any KVM adapter
cable must not exceed 300 m (KA7230S / KA7240S 200 m).
3. Connect the KVM adapter cable to the computer.
Using a KVM adapter cable that is appropriate for the computer you are
installing, plug the adapter cable's connectors into their respective ports on
the computer (see page 189).
4. Connect the KVM adapter cable to the KM0532 / KM0932.
Use Cat 5e or Cat 6 cable to connect the KVM adapter cable to any
available KVM port on the KM0532 / KM0932.
(Repeat steps 3 and 4 for all computers that you wish to connect. Up to 32
computers may be connected in this fashion.)
5. Plug a cable from the LAN or WAN into the KM0532 or KM0932's LAN
port.
6. Connect a PON unit (Optional)
Use Cat. 5e or Cat 6 cable to connect the KM0532 or KM0932's PON port
to an SA0142 Adapter. Connect the Adapter to the PON IN port of a
PN0108 Power Over the Net™ unit (see page 192).
20