Table of Contents
Advertisement
4. Navigate to the directory where you want to save the file and click Save.
Restore
To restore system configuration settings, do the following:
1. In the Restore panel, click Browse.
2. Navigate to the directory where the backup file is located and select it.
3. When you return to the Backup/Restore page enter the password you set
when the backup file was created.
Note: If you did not set a password for the file, leave the field blank.
4. Click Restore.
When the Restore procedure has finished, a message stating that the
Matrix KVM Switch will reboot is sent to all users with active sessions.
After a short while the switch reboots. When it comes back up the
configuration settings that were restored from the backup file are in effect.
Chapter 12. Maintenance
155
Advertisement
Table of Contents
