ATEN KM0932 User Manual page 60

KM0032 / KM0532 / KM0932 User Manual
Browser UI
The Device Management settings are described in the table, below:
Item
General Device Name
MAC Address
IP Address
Power Supply
Detection
Power 1 Status Status of Power Supply 1 (On/Off)
Power 2 Status Status of Power Supply 2 (On/Off)
46
Allows you to give the switch a name. This can be
convenient by helping you to distinguish among the
various switches in a large, cascaded installation. Simply
key the name of the switch into the text box to the right of
the heading.
Displays the switch's MAC Address.
Displays the switch's IP Address.
When box is checked if power is not detected at one
power source, power is automatically switched to the
second available power source.
Meaning