Assigning Device Permissions From The Group Menu - ATEN KM0932 User Manual

Heading
View Only The user can only view the remote screen; he cannot
perform any operations on it.
Full Access The user can view the remote screen and can perform
operations on the remote system from his keyboard and
monitor. If this setting is enabled, the Virtual Media setting
checkbox becomes active.
Virtual Click to put a checkmark in the box to enable the user to
Media use the virtual media function on this port. See VM Mount:,
page 106 for details on mounting virtual media devices.
5. Repeat the procedure for each port you wish to assign.
6. When you have finished making your choices, click Save.
7. In the confirmation popup that appears, click OK.

Assigning Device Permissions From the Group Menu

To assign a device permissions to a Group of users, do the following:
1. Select Groups on the menu bar.
1. In the Sidebar, click the group's name
– or –
In the main panel, select the group's name, then click Modify.
2. In the Groups page that comes up, select the Devices tab.
3. The screen that comes up is the same one that appears in the User menu,
except that there isn't a No Access setting on this page.
The difference between using this page and the User page, is that whatever
settings you make apply to all members of the group instead of just one
individual member.
Make your device assignments according to the information described
under Assigning Device Permissions From the User Menu, page 95.
Chapter 7. User Management
Description
97