CM1942 User Manual
HSM Summary Table
After invoking HSM (see page 21), key in one of the following keys to perform
the corresponding function:
Key
[F1]
[F2]
[F3]
[F4]
[F5]
[F6] [n][n] [Enter]
[F10]
[B]
[E]
[H]
[K] [Enter]
[L] [resolution]
[Enter]
[M]
[N]
[O] [Enter]
[P] [m] [n] [Enter]
[R] [Enter]
[S]
30
Sets the keyboard and mouse to SPC mode so that it can work
under special operating systems as a standard (104 key)
keyboard and mouse.
Enables Mac keyboard emulation.
Enables Sun keyboard emulation.
Print the switch's current settings via a text editor or word
processor.
Performs a USB keyboard and mouse reset.
Sets the keyboard language layout. Where nn is a two digit
number that represents the keyboard language code (US
English: 33, French: 08, German: 09, Japanese: 15).
Enables Windows keyboard emulation.
Enables / disables the buzzer.
Turns the power-on-detection function on/off.
Toggles between the default and alternate HSM invocation keys.
Enables / disables N-key rollover keyboard supporting function.
Sets the resolution of your monitor.
resolution = enters the resolution of your monitor, the available
resolution value can be set from 100 ~ 9999 x 100 ~ 9999.
Enables / disables mouse emulation.
Enables / disables keyboard emulation.
Switches between single PC mode and dual PC mode.
Configures the physical monitor layout for boundless switching.
m = A or B, refers to the row number.
n = 1 or 2, refers to the monitor's column number.
Resets the hotkey settings to their default status.
Toggles between the default and alternate manual port selection
pushbutton settings.
Function