Cascading Other Kvm Switches - ATEN KM0932 User Manual

KM0032 / KM0532 / KM0932 User Manual

Cascading Other KVM Switches

To cascade KVM switches other than the KM0532 or KM0932, a KVM
adapter cable is required. The adapter cable converts the KM0532 / KM0932's
port signals to ones appropriate for the connectors on the KVM switch that you
are cascading.
Note: Non-KM0532 / KM0932 switches do not support additional cascading.
After cascading a non-KM0532 / KM0932 KVM switch, you cannot
cascade any more KVM switches from it.
To cascade a KVM switch other than the KM0532 / KM0932:
1. Use Cat 5e or Cat 6 cable to connect a KVM port on the KM0532 or
KM0932 to a KVM adapter cable appropriate for the KVM switch you are
connecting. (See KVM Adapter Cables, page 6 for a list of KVM adapter
cables and the platforms that they support.)
2. Connect the cables on the KVM adapter cable to the console ports on the
KVM switch you are installing.
Other Cascaded KVM Switch Installation Diagram
26
KH1508A
KA7120