Taking Pictures With The Optional Camera; (Snapshot Function); Connecting The Speaker Microphone; With Camera - Yaesu FTM-400DR Operating Manual

Taking Pictures with the optional Camera (Snapshot Function)
Snapshots can be easily taken with the camera that is built into the optional speaker
microphone "MH-85A11U".
The picture taken will appear on the display for several seconds and can also be
transmitted to other transceivers simply by pressing the transmit picture button on the
microphone.
Tips
• Refer to our YAESU website and catalog for the transceiver models that can transmit pictures.
• The picture transmit button on the microphone can only transmit picture data after the image has
been taken.
• The snapshot function will not operate unless the micro-SD card is inserted into the card slot on the
main body.
The picture taken will be saved in the micro-SD card inserted into the main body card slot.
The saved picture data can be transmitted to transceivers operating in the digital mode.
Connecting the speaker microphone with camera
1
Switch the power supply to the radio OFF
2
Connect the MH-85A11U to the main body
Refer to the figure on the right to plug the connector
of the microphone into the [DATA] jack at the front of
the main body.
Caution Check the direction of the connector and plug it in
all the way.
3
Referring to the figure, mount the provided
microphone cord holder to secure the MH-85A11U
cord to the main body.
Caution Remove the screws at the side of the radio and
use the provided screw and washer to mount the
microphone cord holder.
Tip As the microphone connector can be passed through the
microphone cord holder attached to the radio, there is no
need to remove it once it is mounted.
4
Switch on the power supply to the main device
5
Press for one second or longer
The set-up menu will be displayed.
6
Touch [DATA]
140
Cord
holder
Remove
the screw
Provided
of the main
washer
body
Provided
screw