Setting The Sub-Band Mute; Setting The Sensitivity Of The Microphone; Memory Channel Settings; Setting The Display Method For The Memory Tag - Yaesu FTM-400DR Operating Manual

Setting the sub-band mute
The receive audio of the sub-band can be automatically muted when receiving signals in
the main band.
1
Press for one second or longer
The set-up menu will be displayed.
2
Touch [TX/RX]
3
Touch [AUDIO]
4
Touch [1 SUB BAND MUTE] to select OFF/ON
The setting will switch between "ON" and "OFF" each
time the symbol is touched.
OFF: The sub-band audio will not be muted when a
signal is received on the main band.
ON: The sub-band audio will be muted when a signal
is received on the main band.
Tip Factory default value: OFF
5
Press for one second or longer
The sub-band mute will be set and the display will return to the previous screen.
Setting the sensitivity of the microphone
The sensitivity (gain) of the microphone can be adjusted.
Refer to "Adjusting the sensitivity of the microphone" (
Memory channel settings
Setting the display method for the memory tag
The display format for the name and frequency assigned to a memory can be selected
for each channel.
Refer to "Changing the display format of the memory tag" (
Setting the memory scan method
The memory scan can be set to scan for all memory channels or only specified memory
channels.
Refer to "Selecting the scanning method" (
Using the Set-up Menu
P.50) for details.
P.68) for details.
P.75) for details.
179