Setup Menu: Sd Card; Saving & Loading Data, To & From The Microsd Memory Card; Display Microsd Memory Card Information; Initializing The Micro-Sd Card - Yaesu FTM-300DR Advance Manual

Setup Menu: SD CARD

1 Saving & Loading Data, to & from the microSD Memory Card
The transceiver settings information can be saved to a microSD memory card, also the
saved information can be loaded to the transceiver.
1. Press and hold the [F(SETUP)] key  [SD CARD]  [1 BACKUP]
2. Rotate the DIAL knob to select the operation to be performed.
WRITE TO SD
READ FROM SD
3. Press the DIAL knob.
The copy direction selection screen will be displayed.
4. Rotate the DIAL knob to select the file to be copied, then press the DIAL knob.
The confirmation screen will be displayed.
ALL
MEMORY
SETUP
5. Rotate the DIAL knob to select [OK], then press the DIAL knob.
"Completed" will be displayed when the copying is completed.

2 Display microSD Memory Card Information

Display information from SD Memory Card.
1. Press and hold the [F(SETUP)] key  [SD CARD]  [2 MEMORY INFO]
The bar graph and the following information will be displayed:
Used space : xx,xxx MB
Free space : xx,xxx MB
Capacity : xx,xxx MB

3 Initializing the micro-SD card

Initialize a new micro-SD memory card.
For details, refer to the Operating Manual.

Setup Menu: OPTION

1 Using the Optional Microphone with Camera

Set the image size and quality for the optional microphone with camera (MH-85A11U).
For details, refer to the Operating Manual.

2 Bluetooth

Make Bluetooth settings and connect to a Bluetooth headset.
®
For details, refer to the Operating Manual.
Saves the transceiver setting information to a microSD memory
card.
Loads the information to the transceiver from a microSD mem-
ory card.
Copies all data.
Copies only the memory channels and backtrack position infor-
mation.
Copies only the set-up menu settings.
59