Setting The Display Brightness; Setting The Display Contrast; Switching The Time Display; And The Voltage Display - Yaesu FTM-400DR Operating Manual

3
Touch [4 BAND SCOPE] to select the frequency width
The frequency bandwidth will switch between "WIDE"
and "NARROW" each time this symbol is touched.
WIDE: The frequency bandwidth will be displayed
using a wide search width.
NARROW: The frequency bandwidth will be displayed
using a narrow search width.
WIDE
NARROW
Tip Factory default value: WIDE
4
Press for one second or longer
The bandwidth of the frequency will be set and the display will return to the previous
screen.
Setting the display brightness
The brightness of the touch panel can be set.
Refer to "Adjusting the display brightness" (
Setting the display contrast
The contrast of the touch panel can be adjusted.
Refer to "Adjusting the display contrast" (
Switching the time display and the voltage display
The display at the top right of the display can be changed between "Time Display" and
"Voltage Display".
1
Press for one second or longer
The set-up menu will be displayed.
2
Touch [DISPLAY]
VFO mode Memory mode
±25 steps ±25 channels
±12 steps ±5 channels
P.58) for details.
Using the Set-up Menu
P.58) for details.
173