Setting The Geodetic Reference System; Of The Gps Function; Positioning Using The External Gps Device; Setting The Interval For Recording The Gps Position Information - Yaesu FTM-400DR Operating Manual

Using the Set-up Menu
Setting the geodetic reference system of the GPS function
The geodetic reference system which serves as the positioning standard of the GPS
function can be set.
1
Press for one second or longer
The set-up menu will be displayed.
2
Touch [CONFIG]
3
Touch [16 GPS DATUM] to set the geodetic
reference system
The setting switches between "WGS-84" and
"TOKYO MEAN" each time it is touched.
WGS-84: Positions using the global geodetic
reference system. This is being used as a
standard all around the world.
TOKYO MEAN: Positions using the Japanese
Tip Factory default value: WGS-84
4
Press for one second or longer
The geodetic reference system of the GPS function will be set and the display will
return to the previous screen.
Positioning using the external GPS device
This is set when connecting an external GPS reception device.
Refer to "Positioning using an external GPS device" (
Setting the interval for recording the GPS position information
The time interval for recording your own position information in the micro-SD card can
be set.
Refer to "Recording the position information (GPS log function)" (
192
geodetic reference system. When
positioning in Japan (Tokyo), the
error can be made smaller.
P.84) for details.
P.89) for details.