Basic Methods To Use The Gm Function - Yaesu FTM-400DR Operating Manual

Basic Methods to use the GM function
There are two ways to use the GM function:
(1) Displays all stations where the GM function is in operation in communications range
(maximum of 24 stations can be displayed)
(2) Registers the ID of partners in the group and displays only the partners
An explanation of the two methods of starting the GM operation will be given.
Refer to the separate Operating Manual GM Edition for other details on how to use the
function (download the manual from our YAESU website).
● Displaying all the stations where the GM function is in operation
1
Tune the frequency in Band A
2
Press
Up to 24 stations operating within the sphere
of communication where the GM function is in
operation.
Tips • Stations within the sphere of communications are
displayed in green.
• Stations outside the sphere of communications are
displayed in grey.
● Displaying only partners registered in the group
When a group that has been created beforehand is selected from the group list and the
screen is touched, the status of the members registered in that group will be displayed.
A total of up to 16 groups can be created. Names such as "Touring", "Camp" etc. can be
assigned to the groups. Up to 24 stations can be registered as members in each group.
1
Tune in the frequency of Band A
2
Press
3
Touch [GROUP]
100 100