Switching The Operating Mode - Yaesu FTM-400DR Operating Manual

Receiving
4
Touch [7 FM AM STEP]
The frequency step that is currently set up will
change to orange.
5
Turn to select the frequency step
The setting will change in the following sequence:
AUTO → 5.00 KHz → 6.25 KHz → 8.33 KHz (air
band only) → 10.00 KHz → 12.50 KHz → 15.00 KHz
→ 20.00 KHz → 25.00 KHz → 50.00 KHz →
100.00 KHz
Tip Factory default value: AUTO
6
Touch [7 FM AM STEP]
The selected frequency step will be set, changing
from orange to green.
7
Press for one second or longer
The frequency step will be set and the display will
return to the previous screen.
Tip The display can also be returned to the previous screen
by touching [BACK] twice.
Switching the operating mode
The operating mode can be switched between the VFO mode where the frequency
can be freely set, and the memory mode where the channels saved in the memory are
recalled for operation.
1
Choose the operating band
44