Yaesu FTM-400DR Operating Manual page 211

● Receiver
Circuit type
Intermediate frequencies
Receiver Sensitivity
Squelch sensitivity
Selectivity
AF output
AF output impedance
Strength of secondary radio waves: 4 nW and below
Cautions
z Rated values are at normal temperature and pressure.
z Ratings and specifications are subject to change without notice.
● Symbols placed on the equipment
Direct current
: Double conversion super-heterodyne
: A band:
1st : 47.25 MHz, 2nd :450 kHz
B band:
1st : 44.85 MHz, 2nd : 450 kHz
: 108 - 137 MHz (AM)
137 - 140 MHz (FM)
140 - 150MHz (FM)
150 - 174 MHz (FM)
174 - 222 MHz (FM)
222 - 300 MHz (FM)
300 - 336 MHz (AM)
336 - 420 MHz (FM)
420 - 470 MHz (FM)
470 - 520 MHz (FM)
800 - 900 MHz (FM)
900 - 999.99 MHz (FM)
Digital mode
140 - 150 MHz (Digital)
420 - 470 MHz (Digital)
: 0.16μV (144/430 MHz)
: AM, FM 12 kHz/35 kHz (−6 dB/−60 dB)
: 3 W (8 Ω, THD10%, 13.8 V) internal speaker
8 W (4 Ω, THD10%, 13.8 V) Optional MLS-200-M10
: 4 - 16 Ω
Ratings
0.8μV typ for 10 dB SN
0.2μV for 12 dB SINAD
0.2μV for 12 dB SINAD
0.25μV for 12 dB SINAD
0.3μV typ for 12 dB SINAD
0.25μV typ for 12 dB SINAD
0.8μV typ for 10 dB SINAD
0.25μV for 12 dB SINAD
0.2μV typ for 12 dB SINAD
0.2μV for 12 dB SINAD
0.4μV typ for 12 dB SINAD
0.8μV typ for 12 dB SINAD
Cellular blocked (USA only)
0.19μV typ for BER 1%
0.19μV typ for BER 1%
211