Installing The Micro-Sd Card; Removing The Micro-Sd Card - Yaesu FTM-400DR Operating Manual
144/430mhz 50w dual band c4fm fdma/fm
Hide thumbs
Also See for FTM-400DR:
- Operating manual (217 pages) ,
- Instruction manual (97 pages) ,
- Firmware update instruction manual (19 pages)
Table of Contents
Advertisement
Setting Up the micro-SD Card
Installing the micro-SD card
1
Press
for 2 seconds or longer to switch off the
power to the main body
2
Insert the micro-SD card into the micro-SD card slot,
with the terminal face on top, until a click sound is
heard
Cautions
z Insert the micro-SD card in the correct direction.
z Do not touch the terminal of the micro-SD card
with your hands.
After the power is switched on, the "
be displayed at the top right of the display.
Tip
It may take a while for the icon to appear depending on
the card capacity.
Removing the micro-SD card
1
Press
for 2 seconds or longer to switch off the power to the main body
2
Push in on the microSD card
A click sound will be heard and the micro-SD card will be pushed outward.
3
Pull the micro-SD card from the micro-SD card slot
34
" icon will
micro-SD
microSD
カードスロッ ト
card slot
端子面
Terminal face
micro-SD card
microSDカード
Advertisement
Table of Contents
