Taking Pictures; Viewing The Saved Image - Yaesu FT3DR Operating Manual

Taking pictures

1. Connect the camera-equipped speaker microphone (MH-85A11U) to the DATA
terminal of the transceiver.
• When connecting or disconnecting the MH-85A11U, turn off the FT3DR/DE.
• When receiving an AM radio broadcast signal with the camera microphone connected,
noise may occur, but this is not a malfunction.
2. Point the camera lens at the object to be photographed and press the shutter button
on the microphone.
• The captured image appears on the LCD.
• Touch the image, to temporarily turn OFF the display of buttons and view the en-
tire photo. Touch the image again to display the buttons.
3. To save the image onto the microSD memory card, touch [SAVE].
Press the [BACK] key or touch [DEL] to return the display to the previous operating
screen without saving the image.
4. To transmit the saved image to other transceivers, press the
ton) on the MH-85A11U or touch [SEND].
5. Press the [BACK] key or touch [OK] to return to the normal operation.

Viewing the Saved Image

1. Touch [F MW], and then touch [LOG].
If [LOG] is not displayed, touch [BACK ←] to display [LOG] and then touch it.
2. Touch [PICT].
Displays the saved image data list.
3. Touch the image to be displayed.
• Displays the selected image.
• To transmit the image to other transceivers, touch [SEND] or [FWD]. When the
transfer is complete, the screen in step 3 will return.
4. Press the [BACK] key several times to return to the previous operating screen.
(Send Image But-
53