Yaesu FTM-400DR Operating Manual page 138

Using the Bluetooth Headset
Example: When pairing the optional Bluetooth headset "BH-2A"
Tip
Refer to the operating manual of the product used for the pairing method when using a headset other
than BH-2A.
1
Turn the BH-2A headset OFF
2
Press for one second or longer
The set-up menu will be displayed.
3
Touch [CONFIG]
The menu list screen will be displayed.
4
Select and touch [15 Bluetooth PAIRING]
The input screen for the PIN code will be displayed.
Tips • "6111" will be displayed in the PIN code field as the
factory default value.
• When using a headset other than BH-2A, enter the
4-digit PIN code of the headset here. The character at
the cursor position will be overwritten when the number
key on the screen is touched.
5
Press the power supply switch of the BH-2A for 5 seconds
The LED indicator of the BH-2A will blink alternately between red and blue.
6
Touch [ENT]
The display will return to the menu list screen and the
text "Pairing.." will blink in the display field of the set
value.
"Completed" will be displayed when pairing is
successful and the screen will then return to the
menu list.
The LED indicator of the BH-2A will also blink in blue.
Caution Start pairing all over again when "ERROR" is
displayed.
138