TDK-Lambda GH10-100 User Manual page 162

Function
Special Current Upper Limit (SCUL)
Enable registers
Event registers
Power-On Status Clear
Display Brightness
Display Dim Delay [S]
Display Dim Brightness
Factory Calibration Parameters
Table 5-4: Slave Role Non-Volatile Memory Parameters
Slave unit parameters read by communication might not reflect actual system status. I.e. slave
power supply does not reflect OCL mode, Constant Power mode, Slew-rate mode, etc...
LAN non-volatile memory parameters are not affected (for default parameters, refer to Table 2-7:
LAN Non-Volatile Memory Parameters). The only affected parameter is the Host Name which is
updated due to system identification update.
Slave Role
RATED
Not Affected (Preserves Setting)
Not Affected (Preserves Setting)
Not Affected (Preserves Setting)
Not Affected (Preserves Setting)
Not Affected (Preserves Setting)
Not Affected (Preserves Setting)
Not Affected (Preserves Setting)
NOTE
NOTE
151