TDK-Lambda GH10-100 User Manual page 134

SYSTem:FRST <DSC>
Function
Restores factory default parameters and sets communication interface
according to <DSC> parameter.
Refer to Table 2-6 & Table 2-7.
Parameters 1|2|3|4|5, USB|RS232|RS485|LAN|OPTion
SYSTem:FRST without a parameter sets USB communication interface.
1. Factory Reset does not affect advanced parallel configuration acknowledgment (does not affect
power supply configuration (Single, Master or Slave roles does not change).
2. Execution time for this command is ~250mS.
3. <DSC> Parameter is available for firmware revision 02.106 and above.
SYSTem:FIRMware[:VERSion]?
Query
Returns firmware versions string: Interface, Master Control, Display, and
Option (if available).
Return <SRD> xx.xxx,xx.xx,x.x,xx.xxx
Option firmware revision (last xx.xxx field) is seen if the query is sent through optional
communication interface.
SYSTem:PANel:LOCK?
Query Returns the front panel unlocked (0)/locked (1) state.
Return <Bool> 0|1
SYSTem:PARallel?
Query
Returns the Master/Slave setting
Single, Master + # or Slave
Return <SRD> SINGLE|MASTER+#|SLAVE
# represents the number of slave units connected.
SYSTem:PARallel:ACKNowledge
Function Accept present parallel configuration.
SYSTem:PON:TIME?
Query
Returns the total time power supply is connected to AC & Power Switch
is ON. Max value: 2
Unit Minutes
Return
<NR1>
NOTES
NOTE
NOTE
32 -1
123