Seco EASYSHRINK EVO User Instructions page 3

DEAR CUSTOMER
We thank you for purchasing an Easyshrink Evo device.
This induction shrinking device offers you a lot of benefits:
▪
User-friendly: Automatic or manual heating cycles, simple interface,
ergonomic and easy to use control interface.
▪
Quick shrinking and unshrinking of steel, high speed steel, heavy
metal and carbide tools*.
▪
Localized and homogeneous heating of the clamping area
▪
Minimal energy consumption
▪
Fast cooling of the tool and the toolholder
This operating manual will give you all the necessary information to
use this device in the best way.
Our sales team is at your full disposal if you need further clarification.
Your Partner,
Seco Tools
* This device was optimized to be used with all standard Seco Tools
toolholders. Other branded toolholders need to be configured and validated.
PROVISIONS OF WARRANTY
If your product proves to be defective even if it has been used properly
(in accordance with the written operating instruction manual supplied
with it) within a period of 24 months from the date of invoicing, this
product will be repaired or replaced free of charge.
This warranty covers material defects. Any defect that occurs due
to mishandling that is not mentioned in the operating instruction
manual or is due to improper maintenance, etc. is not covered. Seco
Tools' sole liability is limited to repairing or replacing the product.
Any liability for indirect or consequential loss or damage of any
kind incurred or suffered by the customer due to a product defect is
excluded.
3