Table of Contents
Advertisement
CONNECT THE REFRIGERATED UNIT TO THE EASYSHRINK EVO
Plug the cable from the refrigerated unit into the outlet
Never turn on the power without having filled the cooler first.
After first use, it might be necessary to add more water to the
tank (check the level).
Afterwards, a regular check of the water level and quality is
WARNING
recommended.
WATER TEMPERATURE SETTING
When the power is turned on, the water cooler displays « -88 » for 3 seconds
and then displays the temperature of the water.
The water temperature is preset in our plant at +20°C (68°F).
It is adjustable from 10°C to 25°C (50°F to 77°F)
In the case of noticeable condensation, it is recommended to
set the water temperature higher.
WARNING
To see the preset temperature, press the SET button
To modify the preset temperature, simultaneously press SET and « up arrow »
8
or « down arrow »
.
As soon as the SET button is released, the water temperature is displayed.
The temperature varies between « preset temperature » and « preset tempera-
ture + 2° C (35.6°F)».
USE
Install the corresponding contact bushing
holder, and slip over the cooling bell
12
5
.
6
.
7
.
9
for the cooling bells (Ø and holder type-depending) onto the top of the
10
.
10
10
9
5
6
7
8
Advertisement
Table of Contents
