Taking Delivery; Working Environment Of The Device - Seco EASYSHRINK EVO User Instructions

TAKING DELIVERY

The device you have received has been controlled and tested in our plant according to ISO9001 specifications.
If the equipment is being stored or transported under unacceptable conditions it may be permanently damaged.
In this case the manufacturer will exclude all warranty claims and obligations.
Unpacking must be carried out carefully to avoid any damage.
A tilt-watch indicator is positioned on the packaging to guaranty the pallet has not been tipped over.

WORKING ENVIRONMENT OF THE DEVICE

The Easyshrink Evo device needs to be positioned in a dry and clean working area on a stable and rigid surface
that is resistant to hot tool holders (+/-100°C (212°F)).
CONNECTIONS
Remark: The transformer for voltages in the USA or Canada is available as an optional accessory.
▪ Power supply:
The device only accepts the voltage AC 3 x 400 V (+/-10) + PE/28 A/50 Hz
For other voltages the use of a ZFM30IN30 transformer is required, which needs to be bought separately
(CSA approved transformer needed for Canadian market):
- Input voltages: 3 x 208 / 240 / 480 / 600 VAC + GND/28 amp/50-60 Hz
- Output voltages: AC 3 x 400 V + PE/28 A/50 Hz
▪ Air supply:
- 3 to 6 bar (43 to 87 psi)/pipe external Ø10 mm (Ø0.393") (pipe not supplied)
- 3 meters (10 foot) cable is supplied
15