Table of Contents
Advertisement
MOUNTING THE EXTENSION TABLE
(AVAILABLE AS AN ACCESSORY OR DELIVERED WITH THE WATER-COOLING OPTION)
Tighten the 2 screws
1
.
MOUNTING THE COLUMN FOR THE WATER-COOLING TUBES
(DELIVERED WITH THE WATER-COOLING OPTION)
Tighten the 4 screws
2
.
3
Connect the 2 tubes
of the water-cooling system to the connectors of the
column.
FILLING THE COOLER
Open the cover on the top of the cooler (4 screws to release)
Fill in the tank with pure water until the indicator shows you
that the tank is full.
Tap water: 7.5 < pH < 9 / 7°C (44.6°F) < TH < 15°C (59°F)
Note: change the water approx. every 6 months.
4
.
1
2
3
4
11
Advertisement
Table of Contents
