Seco EASYSHRINK EVO User Instructions page 24

After shrinking remove the lock ring
downwards 5 , exposing the split heat-focusing stopper.
Remove the split heat-focusing stoppers
Move the inductor housing
removed.
NOTE
The overall height of the inductor housing limits the « LPR » dimension to
a minimum of 70 mm (2.76"). Any less than this and it will not be possible
to lower the inductor housing sufficiently to gain access to the split heat-
focusing stopper assembly.
24
4 and move the inductor housing
6 (caution – it may be hot).
7 upwards to allow the toolholder to be
4
6
5
7