Table of Contents
Advertisement
Making your own sound set to work with AK-5 Pro
1.
Select a Program that you want to work with the AK-5 Pro
2.
Press PAGE SELECT
3.
SELECT P2/OSC PITCH
SELECT OSC1/ Pitch or OSC2/Pitch
4.
5.
MAKE AMS to Poly After and the Intensity to -00.50 (cents) as show below
Note: if the program is using two OSC then make sure you set them both to PolyAfter
the Intensity for both is = -00.50
6.
SAVE YOUR PROGRAM or WRITE IT (select the down arrow/upper right corner).
7.
Select GLOBAL to set the TRANSPOSE to PREMIDI. Midi Channel = 01.
8.
Select MIDI
9.
Select Midi Routing
10. Make sure Midi Filter is selected for all of them (as shown in the image below)
AK-5 Pro SE/VERSION 4
www.kelfar.net
Korg M3 series
Copyright © 2005-20 Kelfar Technologies
44
Advertisement
Table of Contents
